| Stock and Dyeing—Warp.— | Ital. Organ., 1-55/100 drams, black, bright, 20/22 oz. |
| Filling.— | Jap. Tram., 1-8/10 and 2-7/10 drams, black, souple, 40/44 oz. |
| We should use for this fabric 1 end filling, 5-thread, 4-5/10 drams, but as we have none of this size on hand, we take: 1 end, 2 thread, 1-8/10 drams, and 1 end, 3 thread, 2-7/10 drams. |
| Reed Calculation— | 1 | inch, | 66 | dents | 4 single ends. |
| 46 | " | 3036 | " | ||
| add | 54 | " | (1¾% shrinkage). | ||
| —— | |||||
| Total . . . | 3090 | dents | |||
| Drawing in— | 1st edge, | { | 2 | dents | 6×2, | black. |
| { | 13 | " | 4×2, | white. | ||
| Ground, | 1514 | " | 4×1, | black. | ||
| Cut Edge | { | 2 | " | 6×2 | black. | |
| { | 1 | " | 2×4, | " | ||
| { | 3 | " | empty. | |||
| { | 1 | " | 2×4, | " | ||
| Ground, | 1514 | " | 4×1, | black. | ||
| 2d edge, | { | 2 | " | 6×2, | black. | |
| { | 13 | " | 4×2, | white. | ||
| Satin on 8 shafts, straight draw. Cross-thread for split edge on 3 shafts, see design. | ||||||
| Warping Ticket— | Edge, | { | 12/2 | black. | } | ||||||||||||||||||||||||
| { | 52/2 | white. | } | ||||||||||||||||||||||||||
| Ground, | 6056/1 | black. | } twice over. | ||||||||||||||||||||||||||
| Edge, | { | 12/2 | black. | } | |||||||||||||||||||||||||
| { | 52/2 | white. | } | ||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||
| |||||||||||||||||||||||||||||
| Harness—8 | shafts, | 12368 | heddles | 47 | in. |
| 1 | " | 33 | " | 1 | " |
for the split edge 3 shafts, of which one has only half a heddle.
| Filling—Per 1 in., 80 picks, 2 ends (as described before). |
| Warp Calculation—? lbs = | 12224 ends, black (416 white). |
| 1 end = | 318 yards. |
| 1000 yards = | 1,55 drams. |
| 256 drams = | 1 lb. |
| 100 = | 104 (4% waste). |