This warp has to be beamed in stripes. Make out a diagram for the warper the same as shown in Fig. [95].
Fig. 95
| Harness—Fig. [95] shows how to make a diagram of a harness for a Pekin. The heddles are marked per one shaft. As the repp stripes are only small ones, we use for the satin a full harness, that is, one without open spaces for the repp stripe. All together we have in the satin warp 6888 single and double ends to draw in; of these 252 ends are used for binders, on both sides of the repp stripes. Thus remain for |
| 8 | shafts, | 6636 | heddles | per | 20½ | inches. |
| 1 | " | 40 | " | " | 1 | " |
| Reduction of Filling—Per inch, Per 1 inch, 144 picks, 1 end. |
| Warp Calculation—? lbs = | 6132 ends (1680 ends sky). |
| 1 end = | 106 yards. |
| 1000 yards = | 1,35 drams (sky 1,15 drams). |
| 256 drams = | 1 lb. |
| 100 = | 104 (4% waste). |
| 6132×106×1,35×104 | = 3,56 lbs. for black, or 3 lbs. 8,96 ozs. 10,4 oz. |
| 1000×256×100 |