“Mount Stewart” and “Cromdale,” the last of the Wool Clippers.
The last two ships to be built specially for the Australian wool trade were the magnificent steel skysail-yard ships Mount Stewart and Cromdale. The former was launched in May, 1891, and the latter in June, both from Barclay, Curle’s yard. They were identical sister ships, and were the very latest development of the full-rig ship. They were of course good carriers, with the modern short poop and long sweep of main deck. Yet, in spite of their carrying powers, they both made some excellent passages out and home.
The Cromdale was specially lucky in having Captain E. H. Andrew as her first master, a very experienced and up-to-date sailing ship captain, who had been mate under his father in the Derwent.
The Cromdale came to grief in 1913 when commanded by Captain Arthur. She was 126 days out, bound home from Taltal with nitrate and was heading for Falmouth. There had been a dense fog for some days, when, most unfortunately, a steamer was passed which advised Captain Arthur to alter his course. Not long after a light was suddenly seen through the fog ahead, but before the ship could be put about she struck on the rocks right at the foot of a cliff. This proved to be Bass Point, close to the Lizard light. The ship was so badly holed that the captain ordered the boats out at once. Luckily it was calm weather, and some rockets brought the Cadgwith and Lizard lifeboats upon the scene, but the Cromdale settled down so quickly that there was only just time to save the ship’s papers and the crew’s personal belongings. Lying on the rocks in such an exposed position, it was of course hopeless to think of salving the ship, and the Cromdale became a total loss.
The Mount Stewart is, I believe, still afloat, and still has Aberdeen on her stern.
Perforated Sails.
At first glance a sail with a hole in it would hardly be considered superior to a sail without one, yet sails with holes in them, or perforated sails, as they were called, became quite popular with the most experienced of our sailing ship skippers in the early nineties.
Perforated sails were said to be the idea of an Italian shipmaster in the eighties. This Italian captain’s theory was that a cushion of air or dead wind, as he called it, was collected in the belly of every sail, and acted as a buffer, thus preventing the sail from receiving the whole strength of the wind. He advocated making a hole in the centre of the belly in order to allow this cushion of air to escape, and allow the true wind to blow against the surface of the sail. An important point was the proper placing of these holes; in fore and aft sails they were cut about the centre of the belly made by the clew; the holes in square sails were also cut near the clews, but they were also cut higher up in the sail on a line from the clews to the bunt: topsails and courses generally had the four holes and topgallant sails and royals only two, one in the lower part of the sail towards the clew on each side. These holes were from 5½ to 6 inches in diameter and roped with grammets.
It is easy to understand that this system was more advantageous when one was close-hauled than when running free. But even when running free many shipmasters claimed that it had its merits and held that, though wind certainly did escape through the holes, it was mostly dead wind and even then was caught up again—the mizen by the main, and the main by the fore, so that in the end there was very little real wind that did not do its work in sending the ship along.