As a rule the longer the barrel of a cannon, the greater its range. The 8-inch seacoast guns thus mounted were 35 calibers in length, that is, thirty-five times 8 inches, or 23 feet 4 inches. The requirements of our forces in the field in France called for guns of this same size but of longer range. Consequently an 8-inch gun of 50 calibers—that is, 10 feet longer than the seacoast 8-inch gun—was designed, and 25 of them were ordered. This project came as a later development in the war, the guns being intended for use abroad in 1920. The railway mounts for the weapons had not been placed in production when the armistice came. Because of the incomplete status of this project in the autumn of 1918, the whole undertaking was abandoned.
10-INCH AND 12-INCH GUNS.
There were at the seacoast defenses and in the stores of the Army a large number of 10-inch guns of 34 calibers. Of these 129 were available for mounting on railway cars. It was proposed to mount these weapons on two types of French railway mounts—the Schneider and the Batignolles.
The project to mount 36 of these weapons on Schneider mounts was taken up as a joint operation of the United States and French Governments, the heavy forging and rough machining to be done in this country and the finishing and assembling in the French shops. The American contractors were three. The Harrisburg Manufacturing & Boiler Co. undertook to furnish the major portion of the fabricated materials for the carriages and cars. The Pullman Car Co. contracted to produce the necessary trucks for the gun cars, while the American Car & Foundry Co. engaged to build the ammunition cars.
Eight sets of fabricated parts to be assembled in France had been produced before the armistice was signed. Gen. Pershing had requested the delivery in France of the 36 sets of parts by March 2, 1919. After the armistice was signed there was a natural letdown in speed in nearly all ordnance factories, but even without the spur of military necessity the contracting concerns were able by April 7, 1919, to deliver 22 of the 36 sets ordered. Had the war continued through the winter there is little question but that all 36 sets of parts would have been in France on the date specified.
The 10-inch seacoast gun, Batignolles mount project, was placed exclusively in the hands of the Marion Steam Shovel Co., of Marion, Ohio. It had been proposed also to mount 12-inch seacoast guns on this same type of equipment, and this work, too, went to the Marion concern. There were to be produced 18 of the 10-inch units and 12 of the larger ones.
8-INCH RAILWAY ARTILLERY, BARBETTE TYPE.
This view shows gun in act of hurling projectile parallel to track.
