Fig. 5.—Flat for double doors.
Fig. 6.—Plain flat.
In [Fig. 5] the central opening (the double doors of the plan) serves for curtains fixed to rods by means of sliding rings, or merely as French windows. Of all the “flats,” this is the most valuable, because it is capable of utilization in a multitude of ways. For instance, should the scene be an elaborate drawing-room, the opening will lend itself to French windows, through which can be seen park-land or gardens in the distance. Again, for the presentment of a humble apartment, it has only to be covered with a dresser or any other commonplace article of furniture. Should an opening be required to another room, curtains of course can be hung.
[Fig. 6] depicts a plain “flat.”
The next operation is the covering of the frames, accomplished by the use of brown paper, or, should expenses permit, of canvas. The brown paper is first cut to the size required, and then glued to the frames, only the openings for windows and doors being left. If canvas is chosen for the covering, nailing will be found necessary. To prevent sagging, and to preserve the flat appearance of the material, coat thinly and evenly with a solution of size and water.
Papering
The next item for consideration is papering. A visit to almost any paperhanger’s will reveal the fact, that the shopman possesses quantities of certain designs, perhaps not quite large enough to be of practical service to him for papering a room. In this circumstance the stage carpenter should be able, by the expenditure of a few cents, or a quarter at the outside, to obtain quite enough for his purpose. Next, he can procure from any builder’s yard a few lengths of architrave or beaded edging for doorways and windows. This will have to be mitered and fixed to the frames. A few slips of board, with beading along one edge, should also be purchased at the same time for fixing to the bottom of the frames to form the skirting. Now paste the wall-paper to the frames.
Fig. 7.—Complete door with section.