Measure up from star on side, marked Z, to line at N, the front length less the width of the top of back, and where this reaches on the line fix the height.
From this height draw a line to A, which gives the height of shoulder.
From P as pivot sweep from N to 21 for neck. Place the length of back shoulder from F to S on to N, on line N, and where it reaches will be point 22.
Drop one-half inch below line and curve from 22 to 23, which is one-fourth above the line, to N. Also curve arm-hole from 22 through R to H.
Draw the front line one-half inch inside at 21, curving outside one-half inch near V, coming back to line at U, and outside one-half inch at bottom to point 20.
From H, through L, draw line to 11.
Whatever the distance from 11 to 24 is place over from 11 to 13 and then curve from L, through 12, to 13. Sweep the bottom from 13 by a point 1 inch back of N and flatten this curve near 14.
Midway between R and V fix point 2, and midway between 2 and R point 1.
Measure the distance from the front at U to 10 and from 2 to C.