samples for a while and learned to love them. You will love them so much that you will even get to like the severe lead line which announces them for what they are.
But you must get to reasonably love it as a craft limitation, a necessity, a thing which places bounds and limits to what you can do in this art, and prevents tempting and specious tricks.
How to Make a "Cut-line."—But now, all this being granted, how are we to set about getting the pieces cut? First of all, I would say that it is always well to draw most, if not all, of the necessary lead lines on the cartoon itself. By the necessary lead lines I mean those which separate different colours; for you know that there must be a lead line between these. Then, when these are drawn, it is a question of convenience whether to draw in also the more or less optional lead lines which break up each space of uniform colour into convenient-sized pieces. If you do not want your cartoon afterwards for any other purpose you may as well do so: that is, first "set" the cartoon if it is in charcoal or chalk, and then try the places for these lead lines lightly
in charcoal over the drawing: working thus, you can dust them away time after time till they seem right to you, and then either set them also or not as you choose.
A good, useful setting-mixture for large quantities is composed by mixing equal parts of "white polish" and methylated spirit; allowing it to settle for a week, and pouring off all that is clear. It is used in the ordinary way with a spray diffuser, and will keep for any length of time.
The next step is to make what is called the cut-line. To do this, pin a piece of tracing-cloth over the whole cartoon; this can be got from any artist's-colourman or large stationer. Pin it over the cartoon with the dull surface outwards, and with a soft piece of charcoal draw lines 1/16 to 1/8 of an inch wide down the centre of all the lead lines: remove the cloth from the cartoon, and if any of the lines look awkward or ugly, now that you see them by themselves undisguised by the drawing below, alter them, and then, finally, with a long, thin brush paint them in, over the charcoal, with water-colour lamp-black, this time a true sixteenth of an inch wide. Don't dust the charcoal off
first, it makes the paint cling much better to the shiny cloth.
When this is done, there is a choice of three ways for cutting the glass. One is to make shaped pieces of cartridge-paper as patterns to cut each bit of glass by; another is to place the bits of glass, one by one, over the cut-line and cut freehand by the line you see through the glass. This latter process needs no description, but you cannot employ it for dark glasses because you cannot see the line through: for this you must employ one of the other methods.
How to Transfer the Cutting-line on to the Glass.—Take a bit of glass large enough to cut the piece you want; place it, face upwards, on the table; place the cut-line over it in its proper place, and then slip between them, without moving either, a piece of black "transfer paper": then, with a style or hard pencil, trace the cutting-line down on to the glass. This will not make a black mark visible on the glass, it will only make a grease mark, and that hardly visible, not enough to cut by; but take a soft dabber—a lump of cotton-wool tied up in a bit of old handkerchief—and with this, dipped in dry whitening or
powdered white chalk, dab the glass all over; then blow the surface and you will see a clear white line where the whitening has stuck to the greasy line made by the transfer paper; and by this you can cut very comfortably.