around the edge a ¾ inch hem. Lay it flat and with chalk or a pencil mark the lines as diagrammed. For reinforcement sew on light tape from the points a, b, h, c and f as indicated and converging all at G where a semicircle of the tent material is sewed in and a strong cord loop is attached to the grommet in the peak. This suspension point will receive the greatest stress when the tent is pitched. Upon this tape reinforcement depends the strength more than the kind of cloth used. Make peg loops at e, d, f, a, h, b, and c. The back of the tent will extend from a to b, the sides f to a and b, to c and the front e to d with the apex at G. The holes are protected with grommets procured from the tent shop or hardware store and the cloth reinforced by 3 by 3 inch squares sewed in.