Van Nostrand’s Chemical Annual. A Handbook of Useful Data for Analytical, Manufacturing, and Investigating Chemists, and Chemical Students. Edited by John C. Olsen, M.A., Ph.D., Professor of Analytical Chemistry, Polytechnic Institute, Brooklyn; with the co-operation of Eminent Chemists. Nearly 100 Tables. Crown 8vo. 18/6 net.
Principles of Microscopy. Being an Introduction to Work with the Microscope. Sir A. E. Wright, M.D., F.R.S., D.Sc., Dublin (Honoris Causa), F.R.C.S.I. (Hon.). With many Illustrations and Coloured Plates. Super Royal 8vo. 21/- net.
Ozone. (A Treatise of Electro-Chemistry. Edited by Bertram Blount, F.I.C.) S. Rideal, D.Sc., F.I.C., F.C.S. Demy 8vo. 12/- net. ([See p. 39.])
Metallurgy.
Methods in Metallurgical Analysis. Charles H. White, Assistant Professor in Mining and Metallurgy in Harvard University. Demy 8vo. 106 Illustrations. 21/- net.
Contents.—Definition of the Subject. Sampling. Necessity for Correct Sampling. The Operations of Analysis, Gravimetric, Volumetric Analysis. Calorimetry. Methods of Analysis in the Metallurgy of Iron and Steel. Moisture. Hydroscopic Water. Combined Water. Loss of Ignition. Iron in Ores. Silica, Sulphur, Phosphorus, Alumina, Manganese, Lime, Magnesia and Titanium in Ore. Analysis of—Iron and Steel, Iron Slags, Limestone. Methods of Analysis in the Metallurgy of Copper, Lead, etc. Copper, Lead, Zinc and Arsenic in Ore. Analysis of—Copper Matte, Chilled Blast Furnace Slags, Reverberatory Slags, Briquettes and other Copper-bearing Products, Copper Bullion, Alloys. Methods of Analysis in the Production of the Precious Metals. Analysis of Fluxes. Analysis of Fuels. Analysis of Clay. Methods for the Determination of Some of the Minor Metals. Methods for the Determination of some of the Rarer Metals. Testing of Lubricating Oils. Examination of Boiler Water. Detection of the Metals. Tables. General References.
An Introduction to the Study of Physical Metallurgy. Walter Rosenhain, B.A., D.Sc., F.R.S. 140 Illustrations. Demy 8vo. 12/6 net.
Contents.—The Structure and Constitution of Metals and Alloys. The Microscopic Examination of Metals. The Metallurgical Microscope. The Micro-Structure of Pure Metals and Alloys. The Thermal Study of Alloys. The Constitutional Diagram and the Physical Properties of Alloys. Typical Alloy Systems. The Iron-Carbon System. The Properties of Metals as Related to their Structure and Constitution. The Mechanical Testing of Metals. The Mechanical Testing of Metals (contd.). The Effect of Strain on the Structure of Metals. The Thermal Treatment of Metals. The Mechanical Treatment of Metals, including Casting. Defects and Failures in Metals and Alloys.
The Electro-Metallurgy of Steel. Colin Gow, A.R.S.M., B.Sc. Edited by Bertram Blount. Demy 8vo. Illustrated. About 24/- net.