Figure 2.—Astronomical Clock of de Dondi, showing gearing on the dial for Mercury and escapement crown wheel. Each of the seven side walls of the structure shown in figure 1 was fitted with a dial.
Granted, then, this use of gears, one must guard against any conclusion that the fine-mechanical use of gears to provide special ratios of angular movement was similarly general and widespread. It is customary to adduce here the evidence of the hodometer (taximeter) described by Vitruvius (1st century B.C.) and by Hero of Alexandria (1st century A.D.) and the ingenious automata also described by this latter author and his Islamic followers.[6] One may also cite the use of the reduction gear chain in power machinery as used in the geared windlass of Archimedes and Hero.
Unfortunately, even the most complex automata described by Hero and by such authors as Riḍwān contain gearing in no more extensive context than as a means of transmitting action around a right angle. As for the windlass and hodometer, they do, it is true, contain whole series of gears used in steps as a reduction mechanism, usually for an extraordinarily high ratio, but here the technical details are so etherial that one must doubt whether such devices were actually realized in practice. Thus Vitruvius writes of a wheel 4 feet in diameter and having 400 teeth being turned by a 1-toothed pinion on a cart axle, but it is very doubtful whether such small teeth, necessarily separated by about 3/8 inch, would have the requisite ruggedness. Again, Hero mentions a wheel of 30 teeth which, because of imperfections, might need only 20 turns of a single helix worm to turn it! Such statements behove caution and one must consider whether we have been misled by the 16th-and 17th-century editions of these authors, containing reconstructions now often cited as authoritative but then serving as working diagrams for practical use in that age when the clock was already a familiar and complex mechanism. At all events, even if one admits without substantial evidence that such gear reduction devices were familiar from Hellenistic times onwards, they can hardly serve as more than very distant ancestors of the earliest mechanical clocks.
[Mechanical Clocks]
Before proceeding to a discussion of the controversial evidence which may be used to bridge this gap between the first use of gears and the fully-developed mechanical clock we must examine the other side of this gap. Recent research on the history of early mechanical clocks has demonstrated certain peculiarities most relevant to our present argument.
the european tradition
If one is to establish a terminus ante quem for the appearance of the mechanical clock in Europe, it would appear that 1364 is a most reasonable date. At that time we have the very full mechanical and historical material concerning the horological masterpiece built by Giovanni de Dondi of Padua,[7] and probably started as early as 1348. It might well be possible to set a date a few decades earlier, but in general as one proceeds backwards from this point, the evidence becomes increasingly fragmentary and uncertain. The greatest source of doubt arises from the confusion between sundials, water-clocks, hand-struck time bells, and mechanical clocks, all of which are covered by the term horologium and its vernacular equivalents.
Temporarily postponing the consideration of evidence prior to ca. 1350, we may take Giovanni de Dondi as a starting point and trace a virtually unbroken lineage from his time to the present day. One may follow the spread of clocks through Europe, from large towns to small ones, from the richer cathedrals and abbeys to the less wealthy churches.[8] There is the transition from the tower clocks—showpieces of great institutions—to the simple chamber clock designed for domestic use and to the smaller portable clocks and still smaller and more portable pocket watches. In mechanical refinement a similar continuity may be noted, so that one sees the cumulative effect of the introduction of the spring drive (ca. 1475), pendulum control (ca. 1650), and the anchor escapement (ca. 1680). The transition from de Dondi to the modern chronometer is indeed basically continuous, and though much research needs to be done on special topics, it has an historical unity and seems to conform for the most part to the general pattern of steady mechanical improvement found elsewhere in the history of technology.
Figure 3.—German Wall Clock, Probably About 1450, showing the degeneration in complexity from that of de Dondi's clock.