The Principles of Chemistry, Volume II

by Dmitry Ivanovich Mendeleyev

CHAPTER XXIV
COPPER, SILVER, AND GOLD

That degree of analogy and difference which exists between iron, cobalt, and nickel repeats itself in the corresponding triad ruthenium, rhodium, and palladium, and also in the heavy platinum metals, osmium, iridium, and platinum. These nine metals form Group VIII. of the elements in the periodic system, being the intermediate group between the even elements of the large periods and the uneven, among which we know zinc, cadmium, and mercury in Group II. Copper, silver, and gold complete[1] this transition, because their properties place them in proximity to nickel, palladium, and platinum on the one hand, and to zinc, cadmium, and mercury on the other. Just as Zn, Cd, and Hg; Fe, Ru, and Os; Co, Rh, and Ir; Ni, Pd, and Pt, resemble each other in many respects, so also do Cu, Ag, and Au. Thus, for example, the atomic weight of copper Cu = 63, and in all its properties it stands between Ni = 59 and Zn = 65. But as the transition from Group VIII. to Group II., where zinc is situated, cannot be otherwise than through Group I., so in copper there are certain properties of the elements of Group I. Thus it gives a suboxide, Cu₂O, and salts, CuX, like the elements of Group I., although at the same time it forms an oxide, CuO, and salts CuX₂, like nickel and zinc. In the state of the oxide, CuO, and the salts, CuX₂, copper is analogous to zinc, judging from the insolubility of the carbonates, phosphates, and similar salts, and by the isomorphism, and other characters.[2] In the cuprous salts there is undoubtedly a great resemblance to the silver salts—thus, for example, silver chloride, AgCl, is characterised by its insolubility and capacity of combining with ammonia, and in this respect cuprous chloride closely resembles it, for it is also insoluble in water, and combines with ammonia and dissolves in it, &c. Its composition is also RCl, the same as AgCl, NaCl, KCl, &c., and silver in many compounds resembles, and is even isomorphous with, sodium, so that this again justifies their being brought together. Silver chloride, cuprous chloride, and sodium chloride crystallise in the regular system. Besides which, the specific heats of copper and silver require that they should have the atomic weights ascribed to them. To the oxides Cu₂O and Ag₂O there are corresponding sulphides Ag₂S and Cu₂S. They both occur in nature in crystals of the rhombic system, and, what is most important, copper glance contains an isomorphous mixture of them both, and retains the form of copper glance with various proportions of copper and silver, and therefore has the composition R₂S where R = Cu, Ag.

Notwithstanding the resemblance in the atomic composition of the cuprous compounds, CuX, and silver compounds, AgX, with the compounds of the alkali metals KX, NaX, there is a considerable degree of difference between these two series of elements. This difference is clearly seen in the fact that the alkali metals belong to those elements which combine with extreme facility with oxygen, decompose water, and form the most alkaline bases; whilst silver and copper are oxidised with difficulty, form less energetic oxides, and do not decompose water, even at a rather high temperature. Moreover, they only displace hydrogen from very few acids. The difference between them is also seen in the dissimilarity of the properties of many of the corresponding compounds. Thus cuprous oxide, Cu₂O, and silver oxide, Ag₂O, are insoluble in water: the cuprous and silver carbonates, chlorides, and sulphates are also sparingly soluble in water. The oxides of silver and copper are also easily reduced to metal. This difference in properties is in intimate relation with that difference in the density of the metals which exists in this case. The alkali metals belong to the lightest, and copper and silver to the heaviest, and therefore the distance between the molecules in these metals is very dissimilar—it is greater for the former than the latter (tables in Chapter [XV.]). From the point of view of the periodic law, this difference between copper and silver and such elements of Group I. as potassium and rubidium, is clearly seen from the fact that copper and silver stand in the middle of those large periods (for example, K, Ca, Sc, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, Ga, Ge, As, Se, Br) which start with the true metals of the alkalis—that is to say, the analogy and difference between potassium and copper are of the same nature as that between chromium and selenium, or vanadium and arsenic.

Copper is one of the few metals which have long been known in a metallic form. The Greeks and Romans imported copper chiefly from the island of Cyprus—whence its Latin name, cuprum. It was known to the ancients before iron, and was used, especially when alloyed with other metals, for arms and domestic utensils. That copper was known to the ancients will be understood from the fact that it occurs, although rarely, in a native state, and is easily extracted from its other natural compounds. Among the latter are the oxygen compounds of copper. When ignited with charcoal, they easily give up their oxygen to it, and yield metallic copper; hydrogen also easily takes up the oxygen from copper oxide when heated. Copper occurs in a native state, sometimes in association with other ores, in many parts of the Urals and in Sweden, and in considerable masses in America, especially in the neighbourhood of the great American lakes; and also in Chili, Japan, and China. The oxygen compounds of copper are also of somewhat common occurrence in certain localities; in this respect certain deposits of the Urals are especially famous. The geological period of the Urals (Permian) is characterised by a considerable distribution of copper ores. Copper is met with in the form of cuprous oxide, or suboxide of copper, Cu₂O, and is then known as red copper ore, because it forms red masses which not unfrequently are crystallised in the regular system. It is found much more rarely in the state of cupric oxide, CuO, and is then called black copper ore. The most common of the oxygenised compounds of copper are the basic carbonates corresponding with the oxides. That these compounds are undoubtedly of aqueous origin is apparent, not only from the fact that specimens are frequently found of a gradual transition from the metallic, sulphuretted, and oxidised copper into its various carbonates, but also from the presence of water in their composition, and from the laminar, reniform structure which many of them present. In this respect malachite is particularly well known; it is used as a green paint and also for ornaments, owing to the diversity of the shades of colour presented by the different layers of deposited malachite. The composition of malachite corresponds with the basic carbonate containing one molecule of cupric carbonate to one of hydroxide: CuCO₃,CuH₂O₂. In this form the copper frequently occurs in admixture with various sedimentary rocks, forming large strata, which confirms the aqueous origin of these compounds. There are many such localities in the Perm and other Governments bounding the Urals. Blue carbonate of copper, or azurite, is also often met with in the same localities; it contains the same ingredients as malachite, but in a different proportion, its composition being CuH₂O₂,2CuCO₃. Both these substances may be obtained artificially by the action of the alkali carbonates on solutions of cupric salts at various temperatures. These native carbonates are often used for the extraction of copper, all the more as they very readily give metallic copper, evolving water and carbonic anhydride when ignited, and leaving the easily-reducible cupric oxide. Copper is, however, still more often met with in the form of the sulphides. The sulphides of copper generally occur in chemical combination with the sulphides of iron.[3] These copper-sulphur compounds (copper pyrites CuFeS₂, variegated copper ore Cu₃FeS₃, &c.) generally occur in veins in a rock gangue.

The extraction of copper from its oxide ores does not present any difficulty, because the copper, when ignited with charcoal and melted, is reduced from the impurities which accompany it. This mode of smelting copper ores is carried on in cupola or cylindrical furnaces, fluxes forming a slag being added to the mixture of ore and charcoal. The smelted copper still contains sulphur, iron, and other metallic impurities, from which it is freed by fusion in reverberatory furnaces, with access of air to the surface of the molten metal, as the iron and sulphur are more easily oxidised than the copper. The iron then separates as oxides, which collect in the slag.[4]

Copper is characterised by its red colour, which distinguishes it from all other metals. Pure copper is soft, and may be beaten out by a hammer at the ordinary temperature, and when hot may be rolled into very thin sheets. Extremely thin leaves of copper transmit a green light. The tenacity of copper is also considerable, and next to iron it is one of the most durable metals in this respect. Copper wire of 1 sq. millimetre in section only breaks under a weight of 45 kilograms. The specific gravity of copper is 8·8, unless it contains cavities due to the fact that molten copper absorbs oxygen from the air, which is disengaged on cooling, and therefore gives a porous mass whose density is much less. Rolled copper, and also that which is deposited by the electric current, has a comparatively high density. Copper melts at a bright red heat, about 1050°, although below the temperature at which many kinds of cast iron melt. At a high temperature it is converted into vapour, which communicates a green colour to the flame. Both native copper and that cooled from a molten state crystallise in regular octahedra. Copper is not oxidised in dry air at the ordinary temperature, but when calcined it becomes coated with a layer of oxide, and it does not burn even at the highest temperature. Copper, when calcined in air, forms either the red cuprous oxide or the black cupric oxide, according to the temperature and quantity of air supplied. In air at the ordinary temperature, copper—as everyone knows—becomes coated with a brown layer of oxides or a green coating of basic salts, due to the action of the damp air containing carbonic acid. If this action continue for a prolonged time, the copper is covered with a thick coating of basic carbonate, or the so-called verdigris (the ærugo nobilis of ancient statues). This is due to the fact that copper, although scarcely capable of oxidising by itself,[5] in the presence of water and acids—even very feeble acids, like carbonic acid—absorbs oxygen from the air and forms salts, which is a very characteristic property of it (and of lead).[6] Copper does not decompose water, and therefore does not disengage hydrogen from it either at the ordinary or at high temperatures. Nor does copper liberate hydrogen from the oxygen acids; these act on it in two ways: they either give up a portion of their oxygen, forming lower grades of oxidation, or else only react in the presence of air. Thus, when nitric acid acts on copper it evolves nitric oxide, the copper being oxidised at the expense of the nitric acid. In the same way copper converts sulphuric acid into the lower grade of oxidation—into sulphurous anhydride, SO₂. In these cases the copper is oxidised to copper oxide, which combines with the excess of acid taken, and therefore forms a cupric salt, CuX₂. Dilute nitric acid does not act on copper at the ordinary temperature, but when heated it reacts with great ease; dilute sulphuric acid does not act on copper except in presence of air.

Both the oxides of copper, Cu₂O and CuO, are unacted on by air, and, as already mentioned, they both occur in nature.[6 bis] However, in the majority of cases copper is obtained in the form of cupric oxide and its salts—and the copper compounds used industrially generally belong to this type. This is due to the fact that the cuprous compounds absorb oxygen from the air and pass into cupric compounds. The cupric compounds may serve as the source for the preparation of cuprous oxide, because many reducing agents are capable of deoxidising the oxide into the suboxide. Organic substances are most generally employed for this purpose, and especially saccharine substances, which are able, in the presence of alkalis, to undergo oxidation at the expense of the oxygen of the cupric oxide, and to give acids which combine with the alkali: 2CuO - O = Cu₂O. In this case the deoxidation of the copper may be carried further and metallic copper obtained, if only the reaction be aided by heat. Thus, for example, a fine powder of metallic copper may be obtained by heating an ammoniacal solution of cupric oxide with caustic potash and grape sugar. But if the reducing action of the saccharine substance proceed in the presence of a sufficient quantity of alkali in solution, and at not too high a temperature, cuprous oxide is obtained. To see this reaction clearly, it is not sufficient to take any cupric salt, because the alkali necessary for the reaction might precipitate cupric oxide—it is necessary to add previously some substance which will prevent this precipitation. Among such substances, tartaric acid, C₄H₆O₆, is one of the best. In the presence of a sufficient quantity of tartaric acid, any amount of alkali may be added to a solution of cupric salt without producing a precipitate, because a soluble double salt of cupric oxide and alkali is then formed. If glucose (for instance, honey or molasses) be added to such an alkaline tartaric solution, and the temperature be slightly raised, it first gives a yellow precipitate (this is cuprous hydroxide, CuHO), and then, on boiling, a red precipitate of (anhydrous) cuprous oxide. If such a mixture be left for a long time at the ordinary temperature, it deposits well-formed crystals of anhydrous cuprous oxide belonging to the regular system.[7]

Cupric chloride, CuCl₂, when ignited, gives cuprous chloride, CuCl—i.e. the salt corresponding with suboxide of copper—and therefore cuprous chloride is always formed when copper enters into reaction with chlorine at a high temperature. Thus, for example, when copper is calcined with mercuric chloride, it forms cuprous chloride and vapours of mercury. The same substance is obtained on heating metallic copper in hydrochloric acid, hydrogen being disengaged; but this reaction only proceeds with finely-divided copper, as hydrochloric acid acts very feebly on compact masses of copper, and, in the presence of air, gives cupric chloride. The green solution of cupric chloride is decolorised by metallic copper, cuprous chloride being formed; but this reaction is only accomplished with ease when the solution is very concentrated and in the presence of an excess of hydrochloric acid to dissolve the cuprous chloride. The addition of water to the solution precipitates the cuprous chloride, because it is less soluble in dilute than in strong hydrochloric acid. Many reducing agents which are able to take up half the oxygen from cupric oxide are able, in the presence of hydrochloric acid, to form cuprous chloride. Stannous salts, sulphurous anhydride, alkali sulphites, phosphorous and hypophosphorous acids, and many similar reducing agents, act in this manner. The usual method of preparing cuprous chloride consists in passing sulphurous anhydride into a very strong solution of cupric chloride: 2CuCl₂ + SO₂ + 2H₂O = 2CuCl + 2HCl + H₂SO₄. Cuprous chloride forms colourless cubic crystals which are insoluble in water. It is easily fusible, and even volatile. Under the action of oxidising agents, it passes into the cupric salt, and it absorbs oxygen from moist air, forming cupric oxychloride, Cu₂Cl₂O. Aqueous ammonia easily dissolves cuprous chloride as well as cuprous oxide; the solution also turns blue on exposure to the air. Thus an ammoniacal solution of cuprous chloride serves as an excellent absorbent for oxygen; but this solution absorbs not only oxygen, but also certain other gases—for example, carbonic oxide and acetylene.[8]