‘After a long and painstaking research, natural science has discovered the individualities of the chemical elements, and therefore it is now capable, not only of analysing, but also of synthesising; it can understand and grasp generality and unity, as well as the individualised and multifarious. The general and universal, like time and space, like force and motion, vary uniformly. The uniform admit of interpolations, revealing every intermediate phase; but the multitudinous, the individualised—such as ourselves, or the chemical elements, or the members of a peculiar periodic function of the elements, or Dalton's multiple proportions—is characterised in another way. We see in it—side by side with a general connecting principle—leaps, breaks of continuity, points which escape from the analysis of the infinitely small—an absence of complete intermediate links. Chemistry has found an answer to the question as to the causes of multitudes, and while retaining the conception of many elements, all submitted to the discipline of a general law, it offers an escape from the Indian Nirvana—the absorption in the universal—replacing it by the individualised. However, the place for individuality is so limited by the all-grasping, all-powerful universal, that it is merely a point of support for the understanding of multitude in unity.’

[28] It might be expected from the periodic law and analogies with the series iron, cobalt, nickel, copper, zinc, that the atomic weights of the elements of the series osmium, iridium, platinum, gold, mercury, would rise in this order, and at the time of the establishment of the periodic law (1869), the determinations of Berzelius, Rose, and others gave the following values for the atomic weights: Os = 200, Ir = 197, Pt = 198, Au = 196, Hg = 200. The fulfilment of the expectations of the periodic law was given in the first place by the fresh determinations (Seubert, Dittmar, and Arthur) of the atomic weight of platinum, which proved to be nearly 196, if O = 16 (as Marignac, Brauner, and others propose); in the second place, by the fact that Seubert proved that the atomic weight of osmium is really less than that of platinum, and approximately Os = 191; and, in the third place, by the fact that after the researches of Krüss, Thorpe, and Laurie there was no doubt that the atomic weight of gold is greater than that of platinum—namely, nearly 197.

[28 bis] In Chapter XXII., Note [40], we gave the thermal data for certain of the compounds of copper of the type CuX2; we will now cite certain data for the cuprous compounds of the type CuX, which present an analogy to the corresponding compounds AgX and AuX, some of which were investigated by Thomsen in his classical work, ‘Thermochemische Untersuchungen’ (Vol. iii., 1883). The data are given in the same manner as in the above-mentioned note:

R =CuAgAu
R + Cl+33+29+6
R + Br+25+230
R + I+16+14-6
R + O+41+6-?

Thus we see in the first place that gold, which possesses a much smaller affinity than Ag, evolves far less heat than an equivalent amount of copper, giving the same compound, and in the second place that the combination of copper with one atom of oxygen disengages more heat than its combination with one atom of a halogen, whilst with silver the reverse is the case. This is connected with the fact that Cu2O is more stable under the action of heat than Ag2O.

[29] Heavy atoms and molecules, although they may present many points of analogy, are more easily isolated; thus C16H32, although, like C2H4, it combines with Br2, and has a similar composition, yet reacts with much greater difficulty than C2H4, and in this it resembles gold; the heavy atoms and molecules are, so to say, inert, and already saturated by themselves. Gold in its higher grade of oxidation, Au2O3, presents feeble basic properties and weakly-developed acid properties, so that this oxide of gold, Au2O3, may be referred to the class of feeble acid oxides, like platinic oxide. This is not the case in the highest known oxides of copper and silver. But in the lower grade of oxidation, aurous oxide, Au2O, gold, like silver and copper, presents basic properties, although they are not very pronounced. In this respect it stands very close in its properties, although not in its types of combination (AuX and AuX3), to platinum (PtX2 and PtX4) and its analogues.

As yet the general chemical characteristics of gold and its compounds have not been fully investigated. This is partly due to the fact that very few researches have been undertaken on the compounds of this metal, owing to its inaccessibility for working in large quantities. As the atomic weight of gold is high (Au = 197), the preparation of its compounds requires that it should be taken in large quantities, which forms an obstacle to its being fully studied. Hence the facts concerning the history of this metal are rarely distinguished by that exactitude with which many facts have been established concerning other elements more accessible, and long known in use.

[29 bis] Sonstadt (1872) showed that sea water, besides silver, always contains gold. Munster (1892) showed that the water of the Norwegian fiords contains about 5 milligrams of gold per ton (or 5 milliardths)—i.e. a quantity deserving practical attention, and I think it may be already said that, considering the immeasurable amount of sea water, in time means will be discovered for profitably extracting gold from sea water by bringing it into contact with substances capable of depositing gold upon their surface. The first efforts might be made upon the extraction of salt from sea water, and as the total amount of sea water may be taken as about 2,000,000,000,000,000,000 tons, it follows that it contains about 10,000 million tons of gold. The yearly production of gold is about 200 tons for the whole world, of which about one quarter is extracted in Russia. It is supposed that gold is dissolved in sea water owing to the presence of iodides, which, under the action of animal organisms, yield free iodine. It is thought (as Professor Konovaloff mentions in his work upon ‘The Industries of the United States,’ 1894) that iodine facilitates the solution of the gold, and the organic matter its precipitation. These facts and considerations to a certain extent explain the distribution of gold in veins or rock fissures, chiefly filled with quartz, because there is sufficient reason for supposing that these rocks once formed the ocean bottom. R. Dentrie, and subsequently Wilkinson, showed that organic matter—for instance, cork—and pyrites are able to precipitate gold from its solutions in that metallic form and state in which it occurs in quartz veins, where (especially in the deeper parts of vein deposits) gold is frequently found on the surface of pyrites, chiefly arsenical pyrites. Kazantseff (in Ekaterinburg, 1891) even supposes, from the distribution of the gold in these pyrites, that it occurred in solution as a compound of sulphide of gold and sulphide of arsenic when it penetrated into the veins. It is from such considerations that the origin of vein and pyritic gold is, at the present time, attributed to the reaction of solutions of this metal, the remains of which are seen in the gold still present in sea water.

[30] However, in recent times, especially since about 1870, when chlorine (either as a solution of the gas or as bleaching powder) and bromine began to be applied to the extraction of finely-divided gold from poor ores (previously roasted in order to drive off arsenic and sulphur, and oxidise the iron), the extraction of gold from quartz and pyrites, by the wet method, increases from year to year, and begins to equal the amount extracted from alluvial deposits. Since the nineties the cyanide process (Chapter XIII., Note [13 bis]) has taken an important place among the wet methods for extracting gold from its ores. It consists in pouring a dilute solution of cyanide of potassium (about 500 parts of water and 1 to 4 parts of cyanide of potassium per 1,000 parts of ore, the amount of cyanide depending upon the richness of the ore) and a mixture of it with NaCN, (see Chapter XIII., Note [12]) over the crushed ore (which need not be roasted, whilst roasting is indispensable in the chlorination process, as otherwise the chlorine is used up in oxidising the sulphur, arsenic, &c.) The gold is dissolved very rapidly even from pyrites, where it generally occurs on the surface in such fine and adherent particles that it either cannot be mechanically washed away, or, more frequently is carried away by the stream of water, and cannot be caught by mechanical means or by the mercury used for catching the gold in the sluices. Chlorination had already given the possibility of extracting the finest particles of gold; but the cyanide process enables such pyrites to be treated as could be scarcely worked by other means. The treatment of the crushed ore by the KCN is carried on in simple wooden vats (coated with paraffin or tar) with the greatest possible rapidity (in order that the KCN solution should not have time to change) by a method of systematic lixiviation, and is completed in 10 to 12 hours. The resultant solution of gold, containing AuK(CN)2, is decomposed either with freshly-made zinc filings (but when the gold settles on the Zn, the cyanide solution reacts upon the Zn with the evolution of H2 and formation of ZnH2O2) or by sodium amalgam prepared at the moment of reaction by the action of an electric current upon a solution of NaHO poured into a vessel partially immersed in mercury (the NaCN is renewed continually by this means). The silver in the ore passes into solution, together with the gold, as in amalgamation.

[31] But the particles of gold are sometimes so small that a large amount is lost during the washing. It is then profitable to have recourse to the extraction by chlorine and KCN (Note [30]).