As in the first group lithium is followed by sodium, giving a more basic oxide, so in the second group beryllium is followed by magnesium, and so also in the third group there is, besides the lightest element, boron, whose basic character is scarcely defined, aluminium, Al = 27, whose oxide, alumina, has somewhat distinct basic properties, which, although not so powerful as in magnesium oxide, are more distinct than in boric anhydride. Among the elements of the third group, aluminium is the most widely distributed in nature; it will be sufficient to mention that it enters into the composition of clay to demonstrate the universal distribution of aluminium in the earth's crust.
Alumina is so named from its being the metal of alums (alumen).
Clay, which is so widely distributed and familiar to everybody, is the insoluble residue obtained after the action of water containing carbonic acid on many rocks, and especially on the felspars contained in some of them. Felspar is a compound containing potash or soda, alumina, and silica. The primary rocks, like granite, contain many similar compounds (see Chapter [XVIII.]: Felspars). Felspar is acted on by water containing carbonic acid, all the alkalis (potash and soda), and a portion of the silica passing into the water as substances which are soluble and carried away by it, whilst the alumina and silica left from the felspar remain on the spot where the solution has taken place. This is the original method of the formation of clay in its primary deposits among rocks along whose crevices the atmospheric water has permeated. Such primary deposits often contain a white pure clay, termed kaolin or porcelain clay. But such clay is a rarity, because the conditions for its formation are rarely met with. The water, whilst acting chemically on rocks, at the same time destroys them mechanically, and carries off the finely divided residues of disintegration with it. Clay is most easily subjected to this mechanical action of water, because it is composed of grains of exceedingly small size and void of any visible crystalline structure, which easily remain suspended in water. The cloudy water of running mountain streams generally contains particles of clay in suspension, owing to the above-described chemical and mechanical action of the water on the minerals contained in the mountain rocks. Together with these minute particles of clay the water carries away the coarser components on which it is not able to act—for example, splinters of rock, grains of mica, quartz, &c. They were originally held together by those minerals which form clay. When the water acts on these binding minerals, a sandy mass is formed which water bears away. The cloudy water in which the particles of clay and sand are held in suspension carries them to, and deposits them at, the estuaries of rivers, lakes, seas, and oceans. The coarser particles are first deposited and form sand and similar disintegrated rocky matter, whilst the clay, owing to its finely divided state, is carried on further, and is only deposited in the still parts of the rivers, lakes, &c. Such disintegrations of rocks and separations of clay from sand have been gradually going on during the millions of years of the earth's existence, and are now proceeding, and have been the cause of the formation of the immense deposits of sandstone and clay now forming a part of the earth's strata. Such beds of clay may have been transferred by currents and streams from one locality to another, so that we must distinguish between primary and secondary deposits of clay. In places these beds of clay have, owing to long exposure under water, and perhaps partially owing to the action of heat, undergone compression, and have formed the rocky masses known as clay slates and schists, which sometimes form entire mountains. Roofing slates belong to this class of rocks.
From what has been said above it will be evident that these deposits can never consist of a chemically pure and homogeneous substance, but will contain all kinds of extraneous insoluble finely divided matter, and especially sand—that is, fragments of rock, chiefly quartz (SiO2). It is, however, possible to considerably purify clay from these impurities, owing to the fact that they are the result of mechanical disintegration, whilst the clay has been formed as a residue of the chemical alteration of rocky matter, and therefore its particles are incomparably more minute than the particles of sand and other rock fragments mixed with it. This difference in the size of the grains causes the clay to remain longer in suspension when shaken up in water than the coarser grains of sand. If clay be shaken up in water, and especially if it be previously boiled in it, and if after the first portion has settled the cloudy water be decanted, it will give a deposit of a very much purer clay than the original. This method is employed for purifying kaolin designed for the manufacture of the best kinds of china, earthenware, &c. A similar method is also employed in the investigation of earths for determining the composition of soils chiefly composed of a mixture of sand, clay, limestone, and mould. The limestone is soluble in dilute acids, but neither the clay nor sand passes into solution by this means, and therefore the limestone is easily separated in the investigation of soils. The clay is separated from the sand by a mechanical method similar to that described above, and termed levigation.[17]
By treating clay with strong sulphuric acid, which dissolves the alumina in it, and then (by means of an alkaline carbonate) dissolving the silica which was combined with the alumina in the clay (but not that occurring in the form of sand, &c., which is hardly dissolved by carbonate of soda solution at all even on boiling), we may form an idea of the proportion between the component parts of a clay; and by igniting it at a high temperature, we may determine the amount of water held in it. In the purer sorts of clay dried at 100° (sp. gr. of pure kaolin is about 2·5) this proportion is about 2SiO2 : 2H2O : Al2O3. In this case the conversion of felspar into kaolin is expressed by the equation:—
| K2O,Al2O3,6SiO2 | = | Al2O3,2SiO2 | + | K2O,4SiO2; |
| Felspar | Kaolin |
the compound K2O,4SiO2 passes into solution.
But as a rule clays contain from 45 to 60 p.c. of silica, from 20 to 30 p.c. of alumina, and about 12 p.c. of water; and it cannot be supposed that clays are always homogeneous, because they are an aggregation of residues (of silico-aluminous compounds) which are unacted on by water. Nevertheless, clays always contain a hydrous compound of alumina and silica, which is able to give up the alumina contained by it as a base to strong sulphuric acid, forming aluminium sulphate, which is soluble in water. After this treatment the silica remains, and is soluble in a solution of an alkaline carbonate.[18]