Arsenic occurs in nature, not only combined with metals, but also, although rarely, native and also in combination with sulphur in two minerals—one red, realgar, As2S2, and the other yellow, orpiment, As2S3 (Chapter XX., Note [29]29). Arsenic occurs, but more rarely, in the form of salts of arsenic acid—for instance, the so-called cobalt and nickel blooms, two minerals which are found accompanying other cobalt ores, are the arsenates of these metals. Arsenic is also found in certain clays (ochres) and has been discovered in small quantities in some mineral springs, but it is in general of rarer occurrence in nature than phosphorus. Arsenic is most frequently extracted from arsenical pyrites, FeSAs, which, when roasted without access of air, evolves the vapour of arsenic, ferrous sulphide being left behind. It is also obtained by heating arsenious anhydride with charcoal, in which case carbonic oxide is evolved. In general, the oxides and other compounds are very easily reduced. Solid arsenic is a steel-grey brittle metal, having a bright lustre and scaly structure. Its specific gravity is 5·7. It is opaque and infusible, but volatilises as a yellow vapour which on cooling deposits rhombohedral crystals.[30 bis] The vapour density of arsenic is 150 times greater than that of hydrogen—that is, its molecule, like that of phosphorus, contains 4 atoms, As4. When heated in the air, arsenic easily oxidises into white arsenious anhydride, As2O3, but even at the ordinary temperature it loses its lustre (becomes dull), owing to the formation of a coating of a lower oxide. The latter appears to be as volatile as arsenious anhydride, and it is probable that it is owing to the presence of this compound that the vapours of arsenious compounds, when heated with charcoal (for example, in the reducing flame of a blow-pipe), have the characteristic smell of garlic, because the vapour of arsenic itself has not this odour.
Arsenic easily combines with bromine and chlorine;[31] nitric acid and aqua regia also oxidise it into the higher oxide, or rather its hydrate, arsenic acid.[32] As far as is known, it does not decompose steam, and it acts exceedingly slowly on those acids, like hydrochloric, which are not capable of oxidising.
Arseniuretted hydrogen, arsine, AsH3, resembles phosphuretted hydrogen in many respects. This colourless gas, which liquefies into a mobile liquid at -40°, has a disagreeable garlic-like odour, is only slightly soluble in water, and is exceedingly poisonous. Even in a small quantity it causes great suffering, and if present to any considerable amount in air it even causes death. The other compounds of arsenic are also poisonous, with the exception of the insoluble sulphur compound and some compounds of arsenic acid. Arseniuretted hydrogen, AsH3, is obtained by the action of water on the alloy of arsenic and sodium, sodium hydroxide and arseniuretted hydrogen being formed. It is also formed by the action of sulphuric acid on the alloy of arsenic and zinc: Zn3As2 + 3H2SO4 = 2AsH3 + 3ZnSO4.[33] The oxygen compounds of arsenic are very easily reduced by the action of hydrogen at the moment of its evolution from acids, and the reduced arsenic then combines with the hydrogen; hence, if a certain amount of an oxygen compound of arsenic be put into an apparatus containing zinc and sulphuric acid (and thus serving for the evolution of hydrogen), the hydrogen evolved will contain arseniuretted hydrogen. In this case it is diluted with a considerable amount of hydrogen. But its presence in the most minute quantities may be easily recognised from the fact that it is easily decomposed by heat (200° according to Brunn) into metallic arsenic and hydrogen, and therefore if such impure hydrogen he passed through a moderately-heated tube metallic arsenic will be deposited as a bright layer on the part of the tube which was heated (see Note [30 bis]). This reaction is so sensitive that it enables the most minute traces of arsenic to be discovered; hence it is employed in medical jurisprudence, as a test in poisoning cases. It is easy to discover the presence of arsenic in common zinc, copper, sulphuric and hydrochloric acids, &c. by this method. It is obvious that in testing for poison by Marsh's apparatus it is necessary to take zinc and sulphuric acid quite free from arsenic. The arsenic deposited in the tube may be driven as a volatile metal from one place to another in the current of hydrogen evolved, owing to its volatility. This forms a distinction between arseniuretted and antimoniuretted hydrogen, which is decomposed by heat in just the same way as arseniuretted hydrogen, but the mirror given by Sb is not so volatile as that formed by As.
Fig. 84.—Formation and decomposition of arseniuretted hydrogen. Hydrogen is evolved in the Woulfe's bottle, and when the gas comes off, a solution containing arsenic is poured through the funnel. The presence of AsH3 is recognised from the deposition of a mirror of arsenic when the gas-conducting tube is heated. If the escaping hydrogen be lighted, and a porcelain dish be held in the flame, a film of arsenic is deposited on it. The gas is dried by passing through the tube containing calcium chloride. This apparatus is used for the detection of arsenic by Marsh's test.
If hydrogen contains arseniuretted hydrogen, it also gives metallic arsenic when it burns, because in the reducing flame of hydrogen the oxygen attracted combines entirely with the hydrogen and not with the arsenic, so that if a cold object, such as a piece of china, be held in the hydrogen flame the arsenic will be deposited upon it as a metallic spot.[34]
The most common compound of arsenic is the solid and volatile arsenious anhydride, As2O3, which corresponds with phosphorous and nitrous anhydrides. This very poisonous, colourless, and sweet-tasting substance is generally known under the name of arsenic, or white arsenic. The corresponding hydrate is as yet unknown; its solutions, when evaporated, yield crystals of arsenious anhydride. It is chiefly prepared for the dyer, and is also used as a vermin killer, and sometimes in medicine; it is a product from which all other compounds of arsenic can be prepared. It is obtained as a by-product in roasting cobalt and other ores containing arsenic. Arsenical pyrites are sometimes purposely roasted for the extraction of arsenious anhydride. When arsenical ores are burnt in the air, the sulphur and arsenic are converted into the oxides As2O3 and SO2. The former is a solid at the ordinary temperature, and the latter gaseous, and therefore the arsenious anhydride is deposited as a sublimate in the cooler portion of the flues through which the vapours escape from the furnace. It collects in condensing chambers especially constructed in the flues. The deposit is collected, and after being distilled gives arsenious anhydride in the form of a vitreous non-crystalline mass. This is one of the varieties of arsenious anhydride, which is also known in two crystalline forms. When sublimed—i.e. when it rapidly passes from the state of vapour to the solid state—it appears in the regular system in the form of octahedra.[35] It is obtained in the same form when it is crystallised from acid solutions. The specific gravity of the crystals is 3·7. The other crystalline form (in prisms) belongs to the rhombohedral system, and is also formed by sublimation when the crystals are deposited on a heated surface, or when it is crystallised from alkaline solutions.[36]