General Remarks on Furnishing
In another place in this book ([pp. 228-233]) will be found instructions for making furniture for very small and simple dolls' houses; but for a good dolls' house with several good-sized rooms you would probably prefer, for the most part, to use bought things. Square tables are of course easy to make (a cardboard-box lid on four legs is practically the whole thing), and there are other articles which, if you see your way to devise, are better made at home, instructions for which will be found as you read on; but chairs and round tables and so forth are perhaps most satisfactory when they come from the toy-shop. Both in buying furniture and in making it, it is necessary always to remember the size of the rooms and of the dolls, and the size of whatever furniture you may already have, so as to keep everything in proportion.
Beds
Beds can be made of cardboard-boxes of different sizes. The box turned upside down makes the bed itself, and the cover should be fixed upright behind it for curtains to hang from. These curtains and the frill round the bed should be made of any thin material, such as muslin. The mattress, bolster, and pillows are best made of cotton-wool covered with muslin or calico. Sheets may be made also out of muslin; pillow-cases should be edged with lace; for blankets you use flannel, button-hole-stitched round with colored silk or wool, and the quilt will look best if made of a dainty piece of silk, or muslin over a colored sateen to match the curtains. A tiny nightdress case should not be forgotten. Beds for doll children can be made in the same way out of match-boxes; and for cozy little cots for babies there are walnut shells.
Cardboard Box Beds
Bead Furniture
Bead Chair
Chairs can be made with wire, beads, a little silk or cotton material, some cardboard and cotton-wool. To make a chair in this way, cut a piece of cardboard the size that you want the seat to be. Lay a good wad of cotton-wool over it, and then cover it neatly. On a piece of strong wire thread enough beads to go round the seat of the chair. Sew this firmly to the seat. Then thread beads on four pieces of wire the right length for the legs, and leave a little piece of wire with which to fasten them to the wire round the seat. Then make the back from a longer piece of wire, bent into shape and attached to the seat in the same way, and put a short row of beads across the middle. You will need a pair of tweezers to cut the wire and to finish the fastening securely.