Cork Arm-Chair
Cut a round or square piece of cork about quarter of an inch thick and one inch across. Cover it with a piece of silk or velvet, making all the stitches on that side of the cork which will be the under side of the seat. For the legs put a pin firmly into each corner. Wind a little wool or silk firmly round each leg, finishing it off as neatly as possible. The back of the seat is made by sticking four pins rather closely together and winding the wool or silk in and out of them. Fasten the wool with a tiny knot both when you begin winding and when you finish. Armchairs are made in the same way, except that they are rather larger, and arms—made of small pins—are added.
Chestnut Chairs
Chestnut Chair
Very good dining-room chairs can be made of chestnuts. The flatter side of the nut is the seat, and in this are stuck pins for the back (and arms if necessary), which may be bound together with gold or silver tinsel. Other pins are stuck in underneath for legs.
Sofas
For a sofa a piece of cork about two inches long and half an inch thick is needed. This must be covered, and then quite short pins stuck in for legs. Put a row of short pins along one side and the two ends, and wind the wool neatly in and out of them.