Is sometimes made by casting an anchor, with plenty of scope of cable, whilst a yacht is running free, or before the wind, and bringing her with a long sweep, up to and heading the wind, when another anchor is let go also, and part of the cable of the first anchor hauled in so that she will lie to one anchor on the flood-tide, and the other on the ebb-tide.
CHAPTER III.
The Helm and Rudder.—Sheets.—The Topping-Lift.—Springing a Leak and the Use of the Pump.—Sailing "close-hauled," "by the wind," or "full and by."—To know when a Yacht is as near the Wind as she will lie.—Running free.—Before the Wind, or Scudding.—To execute a Pilot's Luff.
THE HELM AND RUDDER
Control the movement of the yacht through the water, and serve to direct her course.
The rudder may be described as pieces of boards or planks, in a line with the keel, hung upon pivots at the stern of a vessel, in an upright position, and extending from the keel to the rail, and having an attachment, called a tiller or wheel, to move it in either direction, to the right or left, across the line of the keel of the yacht. (See diagram.)
The tiller, which passes through the rudder-head, is moved to the right or left; and this is termed "moving the helm." For instance, "Move the helm over to starboard," "Put the helm to starboard," that is to say, push the tiller over towards the starboard side of the yacht, which will carry the rudder to the port side of the yacht, and, if under way, the bow will change direction towards the left. In other words, when a vessel is under way, and going ahead by her own momentum, or anchored in a tide-way, the following rule always holds good:—