Breast-Hooks.—To have 3 Breast-Hooks, one under the Bowsprit sided 4 inches, the others sided 4-1/2 inches, all of the best English Oak, with arms not less than 3 feet long, clear of Sap and other defects; the two lower ones to be bolted with Copper Bolts. The Throat Bolt to be 3/4 inch diameter, to go through the stem and clenched, and three in each arm of 5/8, all well clenched on a ring.
Beams.—The Beams to be good sound Oak, clear of all defects, to round up 5-1/2 inches. The Beam before and the Beam abaft the Mast to be sided 6 inches, and moulded 6 inches, and not more than 4 feet apart, and to have two Wood lodging Knees to each, also one Iron hanging Knee to each; the remainder of the Beams to be sided 5 inches, and moulded 5 inches, and regularly spaced, and not more than three feet from Centre to Centre, with two 1 inch dowels in each end, instead of dovetailing into the shelf-piece, with a 5/8 inch bolt through each dowel, and an inch and quarter hole bored in the end of all the Beams 10 inches in, and another from the under side to meet it, then seared with a hot Iron to admit Air.
Carlings and Ledgers.—To have 2 fore and aft Carlings between each Beam 4 inches by 3-1/2, and a Ledge 3-1/2 by 3 inches between the Beams where required. The Mast Carlings to be good English Oak, 4 inches thick, and 10 inches broad.
Wales and Bottom Plank.—The Wales to be of English well-seasoned Oak, 3 inches thick, clear of all defects, with one strake of 2-1/2 inches thick next under the Wales, and one bilge strake of 2-1/2 inch each side. The remainder of the Bottom to be full 2 inches thick when worked, all of sound English Oak, except the Garboard and one next to it which may be of Elm; Plank to work 16 feet long with 6 feet shifts, and two strakes between each Butt: the first strake above the Wales to be 2 inches thick, the remainder 2 inches, paint strake 2 inches.
Spirketting.—The Spirketting to be 2 inches thick.
Waterways.—The Waterways to be of English Oak, 3 inches thick, clear of Sap and strakes, and not less than 6 inches broad in any part.
Plansheer.—The Plansheer of good English Oak, full 2 inches thick when worked, and to form the lower Port Sills.
Shelf Pieces.—The Shelf Pieces to be fitted to the Timbers instead of working it over the Clamp, as heretofore, to be of good sound English Oak, 6 inches broad, 3-1/2 inches thick, and bolted with 5/8 inch bolts, two feet apart, well clenched.
Clamps.—The Clamps to be of good sound Oak, 8 inches broad and 2 inches thick, fitted up to the under side of the Shelf Pieces.
Ceiling.—To have two strakes of 2 inch Oak on the Floor and lower Futtock Heads, both sides, and the Ceiling to be of 1-1/4 inch Oak, all English, as high as one foot above the lower Deck; the remainder as high as the clamp, to be of Red Pine, clear of Sap and other defects, 3/4 inch thick.