EARS: Cut two petal shaped pieces from brown felt or scrap fur and two pieces from pink felt. Sew the pink and brown pieces together, leaving an opening for turning. Turn and stitch to head. Pleat felt.
MANE: Sew bushy yarn pom poms (see [page 32]) or strips of scrap fur over the top of the head and down around the neck (Figure 3).
PAWS: Make two small paws from the second sock or the fingers of an old glove and sew over the slits at the sides of the puppet. Add small yarn pom poms or fur scraps near the ends (Figure 4).
FINISHING TOUCHES: If he is to be THE LION in “The Wizard of Oz” hang a little heart locket around the neck.
BILLY GOAT
Fig. 1 · Fig. 2 · Fig. 3 · Fig. 4
Follow the basic instruction for the finger puppets on [page 35].
FEATURES: Cut toe from second sock, turn inside out and sew to a narrower end (Figure 1). Turn, stuff and stitch to the face. Embroider two nostrils at the tip and sew on a red mouth. Cut two circles of brown felt and sew to each side of the head. Add bright buttons or beads to complete the eyes. For a sleepy look, use flat button eyes and sew crescent-shaped pieces of felt over so that only the bottom half of the eyes shows. Embroider eyelashes, or cut them from felt, if you want to give Mr. Billy Goat a coy expression.
EARS AND HORNS: Cut ears as shown and sew to the top of the head (Figure 2). Make horns from white felt, sewing them into a tube. Insert pipe cleaners into the tubes so that they can be bent to the desired shape. Sew firmly to the top of the head, pushing pipe cleaners down into the head a bit. Curve horns backwards (Figure 3).