Fig. 29.—A Carpenter's Marking-Brush Made of Wood.
Fig. 30.—The Sumi-Tsubo.
A plumb-line is made with a strip of wood four or five feet in length, to each end of which is nailed, at right angles, a strip of wood four or five inches long, projecting an inch on one side. These two transverse strips are of exactly the same length, and are so adjusted to the longer strip as to project the same distance. From the longer arm of one of these pieces is suspended a cord with a weight at the lower end. In plumbing a wall, the short ends of the transverse pieces are brought against the wall or portion to be levelled, and an adjustment is made till the cord just touches the edge of the lower arm. The accompanying sketch ([fig. 31]) will make clear the appearance and method of using this simple device.
Fig. 31.—The Japanese Plumb-Line.
In gluing pieces of wood together, more especially veneers, the Japanese resort to a device which is common with American cabinet-makers,—of bringing into play a number of elastic or bamboo rods, one end [pg 43] coming against a firm ceiling or support, and the other end pressing on the wood to be united. In polishing and grinding, the same device is used in getting pressure.