Fig. 18. Crystal faces on topaz crystal shown in [Plate V], B. This crystal habit is typical of the topaz from Mason County.

The white or colorless stones are by far the most common, outnumbering the bluish stones about ten to one. The color of the blue stones tends to be irregularly distributed in zones parallel to the crystal faces. Topaz that is colored in this manner should be cut with the best blue color near the bottom or culet of the gem ([fig. 19]). If done correctly, this will give the entire gemstone the desirable blue color.

Fig. 19. Cross section showing the proper orientation of dark-color zone in a gem cut from an irregularly colored stone.

COLORLESS BLUE

The colorless stones can be turned pale yellow, yellowish brown, or straw yellow by exposure to X-ray radiation, and some of the bluish stones will fluoresce faintly yellowish under ultra-violet light.

The largest gem-quality topaz crystal yet found in North America has come from Mason County. It is a pale-blue crystal weighing 1,296 grams, now in the collection of the U.S. National Museum. Several other large pieces, some weighing over a pound, have been found. One large crystal, exact weight unknown, was found near Katemcy. Several gem cutters have estimated that this stone could easily yield a single, flawless pale-blue gem of about 500 carats. Many large gems have been cut from topaz found in this area, including at least one stone of over 300 carats.

One obstacle in the cutting of topaz is its perfect basal cleavage. The gemstone should be oriented so that no facet of the stone will be parallel to or within less than about 5 degrees of the cleavage direction, or the facet may be very difficult or impossible to polish.

It is difficult to estimate the productivity of this area since its discovery in the early 1900’s. Few systematic attempts have been made to exploit the deposits, and a great amount of the topaz thus far recovered has been found by private collectors. The Mason County topaz deposits are still very productive, and additional exploration may uncover even more gem-producing areas.