After these are made to fit, the upper ends may be rounded down by chisel and compasses, or bevelled, using the plane.
Use ⅞ inch brads or finishing nails, four in each pad or foot to fasten pads to the arms. The pads should project ⅛ inch from ends and sides. To finish the work nicely so the rest will both look well and stand exposure, apply a suitable stain. Allow it to stand at least thirty minutes. Then rub down with a cloth to an even stain. It is better to allow the stain to stand a day or so. This gives time for the stain to set before applying the wax. Otherwise, some of the stain will be loosened and removed when waxing and a lighter shade of stain will result.
PLANT JARDINIÈRE
The measurements are easy since the scale is one-half inch. That is, as you measure the line in the working plan you allow one whole inch for every one-half inch you measure on that. So, if a line measures three and one-half inches, make the line for your box seven inches. This is the real height of the box. Notice some lines have their real measures given at the side.
Directions for making are as follows:
Fold a piece of paper large enough for one of the sides and sketch one-half the outline on one of the folds. Cut to line and then draw the other half. This will give perfect balance. Cut two pieces of wood from this pattern by placing it on the wood and tracing.
From the ruler you can read off the exact size of the jardinière
Draw a line parallel to each side ⅜ inch in on the pattern for a new pattern for the other two sides. These sides will need to be ¾ inch narrower, ⅜ inch on each side, as they must fit between the other two sides. If wood of different thickness is used it will be double the thickness.
Use a coping saw to cut out the base. The tapering sides may be cut to lines by saw, plane or chisel. The curve at the base may be bored by ½-inch auger, and in this way a better curve may be had.