{19}
Two-thirds actual size
{20}
Take about three dozen hairs of colored bucktail, cut off butt ends to the length wanted for the finished fly, not more than one half again as long as the hook, place these on top of the hook as Fig. 10 with butt ends about 1/16" back of the eye (this is held the same as when putting on the tail, Fig. 4). Pull down two or three loops, Fig. 11. Now take about 175 hairs of other colored bucktail, place this on top of the first colored bucktail the same as Fig. 10. Repeat the same operation as Fig. 11. Before finishing the head put a drop of head lacquer on the butt ends of the hairs to cement them in place, finish by making a smooth tapered head with the tying silk, take three or four half hitches, paint the head with two or three coats of lacquer and the job is complete, unless you wish to add jungle cock cheeks, or other combinations of feathers. This of course is done before the head is completed.
{21}
Diagram 4
{22}