When you have built the body up until it looks something like Fig. 4, remove it from the vise and with a sharp pair of scissors trim and shape it until it looks like Figs. 5 and 6. At this stage you should have 3/16" of the shank of the hook left just behind the eye, where you will tie on the wings. Cover this bare hook with the well waxed tying silk, and lay a bunch of hair on top of the hook for wings as Fig. 7. Crisscross the tying silk around the wings and the hook until they are securely tied together. Place several coats of lacquer over he junction of the wings and hook, to more securely bind them in place. Lacquer the entire wings if you wish and when they have partially dried, press them flat, spread them, trim them as Fig. 8, and your Bug is completed.
Any combination of color may be used, different colored wings and tail, different colored rings in the body. White body with red tail and wings is a good pattern. Yellow body, black wings and tail another. Various feather combinations can be used for wings and tall. Create your own designs, and develop your patterns.
{57}
CORK BODIED BASS BUGS (SEE DIAGRAM 10)
These high floaters are easy to make and may be tied on most any size hook desired. Kinked shank hooks should be used to prevent the body from turning on the hook. Colored lacquer or enamel can be used to decorate the bodies, and eyes can be either painted on, or regular small glass eyes inserted and held in place with water-proof glue or lacquer. Any of the fancy feathers that are used for regular bass flies can be used for wings. Hair or feathers can be used for tails, etc. Let us first make one of these cork bodied Bugs on a size 1/0 hook. Take a 1/2" cork cylinder and with a razor blade shape it roughly as Diagram 10, Figs. 1 and 2. Then with a piece of 00 sandpaper held in the right hand and the cylinder in the left it is a very simple matter to give the body a nice smooth, shapely finish. Next cut a small V out of the body as in Fig. 3. This is easier to fit to the hook and easier to cement securely than simply making a slit in the cork. Press the V slit over the hook as in Fig. 4. Apply cement or lacquer liberally to the inside of the V slot, and to the hook shank. Press the piece that was removed securely back into place, bind tightly with string, as in Fig. 5, and let set over night. Next day when the cement has thoroughly dried and the body is permanently fastened to the hook, remove the string and with the sandpaper touch up any rough places on the body, and give a coat of lacquer or enamel of the desired color.
{58}
Diagram 10
{59}
When the body enamel has dried, take a pair of feathers for wings (whole feathers that have the quill in the centre, same as are used for regular bass fly wings are best), and with the tying silk bind these fast to the top side of the shoulders as in Fig. 6. Tie on a tail close to the body, paint on the eyes, paint any other color or designs you wish on the body, and the Bug is completed.