{xii}
Tools two-thirds actual size
{1}
TOOLS, HOOKS AND
MATERIALS
Very few tools are required by the Fly-Tier. Those that are necessary are inexpensive, and most of them can be homemade. However, as with any other craft good tools are an asset. I advise the beginner to procure the following:
TOOLS
Fly-Tiers' vise. There are many styles of fly-tying vises on the market. The simplest is just a slot cut in a 3/8" piece of square steel with a hacksaw, and a thumb screw to tighten the slot. This type of vise will work all right, although rather clumsy and hard to tighten enough to hold the hook truly. Another simple vise is just a small pin chuck, soldered to one end of a 1/4" brass rod, bent at the desired angle, and the other end of the rod soldered to a small C clamp. However, I prefer a vise of the cam lever type. That is, a vise that has a cam lever for opening and closing the jaws. These vises, of which there are several makes, are {2} adjustable to various angles and hook sizes. They will hold all sizes of hooks very firmly, and are easily and quickly opened with a flip of the lever.
Hackle Pliers. These can be purchased for about fifty cents and will prove a worthwhile investment, as they are rather difficult to make satisfactorily.