In making this set you should wade up the outlet of the spring, and stand in the water while making the set. Do not touch the bank or any of the surroundings. The trap should be fitted with a chain about three feet in length, with a two prong drag attached, but most trappers simply wire a stone of eight or ten pounds weight to the end of the chain. The drag, whatever is used, should be buried in the bed of the spring.
I recommend the flesh of the muskrat, skunk, opossum or house-cat for bait, and it should be allowed to taint by remaining about a week in a glass jar. This method was first used by William Schofield a famous fox trapper of the Eastern states. Two men have been known to catch over one hundred foxes in a season with this method, besides considerable other furs taken in the same traps, for the method is good for many other animals besides the fox.
One trapper recommends setting the trap in exactly the same manner, except that the bait sod is omitted, and the bait, a bird, is fastened by means of a stick thrust in the bottom of the spring. The stick must be entirely out of sight, and the bird, apparently, floating in the water. Both of these methods are very good, and are especially recommended for the novice, as they are the easiest and surest methods to start on.
The water sets given above, can of course, only be used in certain places, for in some of the best fox countries, springs cannot be found, and even the streams are not suitable for trapping. For this reason many professional fox trappers prefer to use dry land sets, and the blind set will be found to be one of the very best.
Look for fox tracks in old stock trails, foot paths, old roads in the woods, openings under fences, etc., and having first cleaned the traps by boiling or washing, find a narrow place in the trail and dig out a nest for the trap. Make this nest so that when the trap is set in it, the jaws will lie lengthwise of the trail. Line this nest with dry grass or leaves, and having attached the trap to some sort of a drag, set it and place it in the place prepared. Fill in all around the outside of the jaws with dry dirt, and cover the springs. Now lay a piece of clean paper over the trap and cover all with about one-fourth inch of dirt, making it look like the other parts of the trail as much as possible. The chain and drag must be carefully concealed.
It is best to have a basket or piece of canvas in which to place the dirt while making the set and to carry away what is not needed. Do not spit near the trap, and do not leave any signs of your presence. It is not necessary to wear gloves, but the hands should be kept clean. This is an excellent method, especially for the old, sly animals.
Dry Land Set for Fox.
The professional trappers of the East use the bait method, mostly, and although the different trappers use different baits and scents, the methods of setting the traps are all, practically the same.