PART V.
Secondary Rays.
109. Production of secondary rays. It has long been known that Röntgen rays, when they impinge on solid obstacles, produce secondary rays of much less penetrating power than the incident rays. This was first shown by Perrin and has been investigated in detail by Sagnac, Langevin, Townsend and others. Thus it is not surprising that similar phenomena should be observed for the radiation from radio-active substances. By means of the photographic method, Becquerel[[177]] has made a close study of the secondary radiations produced by radio-active substances. In his earliest observations, he noticed that radiographs of metallic objects were always surrounded by a diffuse border. This effect is due to the secondary rays set up by the incident rays at the surface of the screen.
The secondary rays produced by the α rays are very feeble. They are best shown by polonium, which gives out only α rays, so that the results are not complicated by the action of the β rays. Strong secondary rays are set up at the point of impact of the β or cathodic rays. Becquerel found that the magnitude of this action depended greatly on the velocity of the rays. The rays of lowest velocity gave the most intense secondary action, while the penetrating rays gave, in comparison, scarcely any secondary effect. In consequence of the presence of this secondary radiation, the photographic impression of a screen pierced with holes is not clear and distinct. In each case there is a double photographic impression, due to the primary rays and the secondary rays set up by them.
These secondary rays are deviable by a magnetic field, and in turn produce tertiary rays and so on. The secondary rays are in all cases more readily deviated and absorbed than the primary rays, from which they arise. The very penetrating γ rays give rise to secondary rays, which cause intense action on the photographic plate. When some radium was placed in a cavity inside a deep lead block, rectangular in shape, besides the impression due to the direct rays through the lead, Becquerel observed that there was also a strong impression due to the secondary rays emitted from the surface of the lead. The action of these secondary rays on the plate is so strong that the effect on the plate is, in many cases, increased by adding a metal screen between the active material and the plate.
The comparative photographic action of the primary and secondary rays cannot be taken as a relative measure of the intensity of their radiations. For example, only a small portion of the energy of the β rays is in general absorbed in the sensitive film. Since the secondary rays are far more easily absorbed than the primary rays, a far greater proportion of their energy is expended in producing photographic action than in the case of the primary rays. It is thus not surprising that the secondary rays set up by the β and γ rays may in some cases produce a photographic impression comparable with, if not greater than, the effect of the incident rays.
On account of these secondary rays, radiographs produced by the β rays of radium in general show a diffuse border round the shadow of the object. For this reason radiographs of this kind lack the sharpness of outline of X ray photographs.
110. Secondary radiation produced by α rays. Mme Curie[[178]] has shown by the electric method that the α rays of polonium produce secondary rays. The method adopted was to compare the ionization current between two parallel plates, when two screens of different material, placed over the polonium, were interchanged.
These results show that the α rays of polonium are modified in passing through matter, and that the amount of secondary rays set up varies with screens of different material. Mme Curie, using the same method, was unable to observe any such effect for the β rays of radium. The production of secondary rays by the β rays of radium is, however, readily shown by the photographic method. We have already seen ([section 93]) that very low velocity electrons accompany the α rays from radium or radio-tellurium spread on a metal plate. These electrons are probably liberated when the α rays escape from or impinge upon matter, and the number emitted depends upon the kind of matter used as a screen. The differences shown in the above table when the screens were interchanged are explained simply in this way.
| Screens employed | Thickness in mms. | Current observed |
|---|---|---|
| Aluminium | 0·01 | |
| Cardboard | 0·005 | 17·9 |
| Cardboard | 0·005 | |
| Aluminium | 0·01 | 6·7 |
| Aluminium | 0·01 | |
| Tin | 0·005 | 150 |
| Tin | 0·005 | |
| Aluminium | 0·01 | 126 |
| Tin | 0·005 | |
| Cardboard | 0·005 | 13·9 |
| Cardboard | 0·005 | |
| Tin | 0·005 | 4·4 |