A few notes on the exceptional scantlings of timber in antiquity may be interesting, though not strictly belonging to our subject. A stick of fir prepared to repair a bridge over the Naumachia in the time of Nero was left unused for some time to satisfy public curiosity. It measured 120 feet by 2 feet the entire length. The mast of the vessel which brought the large obelisk from Egypt, afterwards set up in the Circus Maximus, and now in front of S. John Lateran, was 100 feet by 1½ feet, and the tree out of which it was cut required four men, holding hands, to surround it. A stick of cedar, cut in Cyprus and used as the mast of an undecireme, or 11 banked galley of Demetrius, took three men to span the tree out of which it was cut. It was the exceptional sizes of such pieces of timber, and veneers cut from them, which made the value of tables in Rome.
ITALY IN MEDIÆVAL AND RENAISSANCE TIMES
The mediæval craft seems, however, to have been derived from the East, though Theophilus mentions the Germans as clever practitioners in woodwork. A minnesinger's harp of the 14th century, figured by Hefner Alteneck, appears to bear out his remark, though later in date, with its powdering of geometrical inlays and curiously-designed sprigs, which might almost have been produced by the latest art craze, which apes archaic simplicity. It belonged to the knightly poet Oswald von Wolkenstein, who died in 1445; the colours used are two browns, black, white, and green. The oriental inlays of ivory upon wood, elaborate and beautiful geometrical designs, are still produced in India in much the same fashion as in the middle ages, for the possibilities of geometric design were exhausted by the Arabs in Egypt and the Moors in Spain; and in Venice there was a quarter inhabited by workmen of the latter race who made both metal work and objects in wood. Except for the inlaid ivory casket in the Capella Palatina, at Palermo, which seems to be a work of Norman times, we have no work of the kind which can be dated with precision before the appearance in the north of Italy of the similar "lavoro alla Certosa," or "tarsia alla Certosina"; but since inlaying with small pieces of marble and vitreous pastes was practised in central and southern Italy certainly from the 12th century, there is little difficulty in imagining how its use arose. This work has its derivative still existing in England in the so-called "Tonbridge ware," which is made by arranging rods of wood in a pattern and glueing them together, after which sections are sliced off—the same proceeding, in effect, as that which the Egyptians made use of with rods or threads of glass. One must allow, however, that the wooden border inlays, which are also placed under this heading, show greater craft mastery, as the examples appended show, which are typical instances. The chair-back from S. Ambrogio, Milan, is a characteristic example of the simpler form on a tolerably large scale.
| Plate 1.—Patterns used in Borders. | Plate 2.—Various Patterns of Borders. |
Historians are agreed that the cradle of Italian carving and inlaying was Siena, where there is mention of a certain Manuello, who, with his son Parti, worked in the ancient choir of the Cathedral in 1259. Orvieto was another place where tarsia work was made at an early date, but the craftsmen were all Sienese. Mastro Vanni di Tura dell' Ammanato, the Sienese, made the design of the stalls for the Cathedral in 1331, and commenced the work, some remains of which are still preserved in the Museum of the Opera del Duomo. Twenty-eight artists were employed on these stalls; Giovanni Talini, Meo di Nuti, and others, all Sienese, assisted him, but he died before they were finished, and they remained incomplete till 1414, when Domenico di Nicolò is recorded as undertaking the work; but neither did he finish it, for in 1431 the overseers gave it to Pietro di Minella, and then to his brother Antonio, and to Giovanni di Lodovico di Magno. The woods used were ebony, box, walnut, and white poplar, and the cost was 3152 lire. In the 14th century tarsia was executed at Siena, Assisi, where in 1349 Nicolo di Nicoluccio and Tommaso di Ceccolo worked at the Cathedral stalls, which no longer remain; Verona, in the sacristy of S. Anastasia, in which city are some inlays resembling those at Orvieto, and Perugia, where some inlays remain in the Collegio della Mercanzia, but remains of the period are few, as may be expected.
Plate 3.—Chair Back from S. Ambrogio, Milan.