A considerable part of the man's time is consumed in preparation for, or actual participation in, hunting or warfare, but in addition to this he does a goodly portion of the work in the fields, and is the house builder. When a man is about to erect a dwelling he notifies his friends to come and aid him. This they will do without pay, but when in need of similar services they will expect and will receive similar help. All sorts of house-furnishings, such as spoons, meat blocks, or rice mortars are made by the man, and not infrequently, he assists in the making or waterproofing of baskets. A few of the old men of Cibolan still engage in the manufacture of small shell disks with which valuable suits are decorated, but the greater part of those now in use have been inherited, or are purchased from neighboring peoples. The men carve beads out of "Job's tears"[19] and make them into necklaces. For this purpose a peculiarly carved and decorated stick is employed (Plate XXVI). This is placed in the palm of the left hand so that the thumb and forefinger can hold the seed which fits into a depression in the top. A knife in the right hand of the artist is worked over the seed thus cutting a line into which dirt is rubbed. Women's combs are made by shaping a half circle out of light wood and then cutting teeth into it with a saw-like blade of tin or iron.
[19] Coix lachryma Johi L.
Among the men, as with the women, certain industries are monopolized by a few individuals. In this community no men stand higher in the estimation of their fellows than do the smiths and the casters of copper. The writer spent many hours watching I-o, the brass and copper worker of Cibolan, while he shaped bells, bracelets, and betel boxes at his forge on the outskirts of the village (Plate XXVII). Feathered plungers, which worked up and down in two bamboo cylinders, forced air through a small clay-tipped tube into a charcoal fire. This served as a bellows, while a small cup made of straw ashes formed an excellent crucible. The first day I watched I-o, he was making bells. Taking a ball of wax the size of a bucket shot, he put it on the end of a stick (Fig. 26a), and over this moulded the form of a bell in damp ashes obtained from rice straw (b). When several bells were thus fashioned they were dipped in melted wax and were turned on a leaf until smooth, after which an opening was cut through the wax at the bottom of each form (c). Strips of wax were rolled out and laid in shallow grooves which had been cut in the sides of the bells and were pressed in, at intervals, with a small bamboo knife (d). The top stick was then withdrawn, leaving an opening down to the wax ball inside. Into this hole a thin strip of wax was inserted and was doubled back on itself so as to form a hanger (e). For three days the forms were allowed to harden and were covered with several coats of damp straw ashes. Finally they were laid in a bed of the same material with a thin strip of wax leading from each bell to a central core (f). [FIG. 26] The whole, with the exception of the top of the central wax strip, was covered with a thick coating of damp ashes, and when this had hardened pieces of copper, secured from broken gongs, were placed in the crucible, melted and poured into the open end of the clay form. The molten metal took the place of the wax as it was dissolved and flowed to all parts where it had been. After being dropped in water the form was broken open, revealing six nearly perfect little bells which were ready for use as soon as the ashes were removed from them. The same method was used for all other casting. Clay forms were made as desired, were covered with wax, and the final coating of ashes applied before the casting. The workers in copper and brass are under the care and guidance of a spirit, Tolus ka towangan, for whom they make a yearly ceremony, Gomek towangan.
[Transcriber's note: Two different figures on different pages are both labeled FIG. 26.]
Of even greater importance are the smiths who are also under the care of a powerful spirit for whom the Gomek-gomanan ceremony is celebrated each year, just prior to the planting time. Their forges are hidden away in the hemp fields, and I was repeatedly informed that no woman might see the smith at work. Whether or no such a rule is rigidly enforced at all times I cannot say, but at no time did I see a woman about the forge while the fire was burning, and although I was allowed to see and photograph the process, my wife was at all times prevented from doing so. The forge differs in no material respects from that used by the brass casters, except that hollowed out logs replace the bamboo tubes, and that a metal anvil and iron hammers are used. After an iron knife or spear head has been roughly shaped, the smith splits the edge to a slight depth and inserts a band of steel. The iron is pounded down on the harder metal and the whole is brought to a white heat in the charcoal fire. Removing it to the anvil the smith gives the blade one or two light blows and returns it to the fire. This is repeated many times before he begins to add the heavy strokes which finally weld the iron and steel together. The blade having been given its final shape is again heated and is held above a tube of water until the glowing metal begins to turn a yellowish green, when it is plunged into the cold water. This process, repeated many times, gives a fair temper to the whole weapon. Charcoal for the fire is secured by burning logs and chilling them suddenly with cold water.
Brass wire, secured in trade, is made into bracelets in the following manner. In order to soften it and make it more easily worked the roll of wire is heated until it begins to turn grey, when it is allowed to cool and is scraped, so as to restore the yellow color. One end is laid on an anvil made of an iron strip on a wooden block (Plate XXVII), and is cut into various designs by means of metal dies. A wooden cone is used as a form, about which the wire is placed in order to shape and measure it.