[Extract from Memoir read before the Anthropological Institute, in 1878.]
I submit to the Anthropological Institute my first results in carrying out a process that I suggested last August [1877] in my presidential address to the Anthropological Subsection of the British Association at Plymouth, in the following words:--
"Having obtained drawings or photographs of several persons alike in most respects, but differing in minor details, what sure method is there of extracting the typical characteristics from them? I may mention a plan which had occurred both to Mr. Herbert Spencer and myself, the principle of which is to superimpose optically the various drawings, and to accept the aggregate result. Mr. Spencer suggested to me in conversation that the drawings reduced to the same scale might be traced on separate pieces of transparent paper and secured one upon another, and then held between the eye and the light. I have attempted this with some success. My own idea was to throw faint images of the several portraits, in succession, upon the same sensitised photographic plate. I may add that it is perfectly easy to superimpose optically two portraits by means of a stereoscope, and that a person who is used to handle instruments will find a common double eyeglass fitted with stereoscopic lenses to be almost as effectual and far handier than the boxes sold in shops."
Mr. Spencer, as he informed me, had actually devised an instrument, many years ago, for tracing mechanically, longitudinal, transverse, and horizontal sections of heads on transparent paper, intending to superimpose them, and to obtain an average result by transmitted light.
Since my address was published, I have caused trials to be made, and have found, as a matter of fact, that the photographic process of which I there spoke enables us to obtain with mechanical precision a generalised picture; one that represents no man in particular, but portrays an imaginary figure possessing the average features of any given group of men. These ideal faces have a surprising air of reality. Nobody who glanced at one of them for the first time would doubt its being the likeness of a living person, yet, as I have said, it is no such thing; it is the portrait of a type and not of an individual.
I begin by collecting photographs of the persons with whom I propose to deal. They must be similar in attitude and size, but no exactness is necessary in either of these respects. Then, by a simple contrivance, I make two pinholes in each of them, to enable me to hang them up one in front of the other, like a pack of cards, upon the same pair of pins, in such a way that the eyes of all the portraits shall be as nearly as possible superimposed; in which case the remainder of the features will also be superimposed nearly enough. These pinholes correspond to what are technically known to printers as "register marks."
They are easily made: A slip of brass or card has an aperture cut out of its middle, and threads are stretched from opposite sides, making a cross.[22] Two small holes are drilled in the plate, one on either side of the aperture. The slip of brass is laid on the portrait with the aperture over its face. It is turned about until one of the cross threads cuts the pupils of both the eyes, and it is further adjusted until the other thread divides the interval between the pupils in two equal parts. Then it is held firmly, and a prick is made through each of the holes.
[Footnote 22: I am indebted for the woodcuts to the Editor of Nature, in which journal this memoir first appeared.]
The portraits being thus arranged, a photographic camera is directed upon them. Suppose there are eight portraits in the pack, and that under existing circumstances it would require an exposure of eighty seconds to give an exact photographic copy of any one of them. The general principle of proceeding is this, subject in practice to some variations of detail, depending on the different brightness of the several portraits. We throw the image of each of the eight portraits in turn upon the same part of the sensitised plate for ten seconds. Thus, portrait No. 1 is in the front of the pack; we take the cap off the object glass of the camera for ten seconds, and afterwards replace it. We then remove No. 1 from the pins, and No. 2 appears in the front; we take off the cap a second time for ten seconds, and again replace it. Next we remove No. 2, and No. 3 appears in the front, which we treat as its predecessors, and so we go on to the last of the pack.