Flint implement from Stonehenge.
ii. Hammer-axes, chipped to an edge on one side and flat on the other.
iii. Rounded hammer-stones; many of which show signs of bruising and hard wear. The material used in these three classes was flint. All of these tools would have been used in the hand, and not set in a handle.
iv. Rounded hammer-stones of Sarsen, varying from one pound to six and a half pounds in weight. They would have been used for the surface dressing of the stones, to which reference will be made later.
v. Mauls of compact Sarsen weighing between thirty-six and sixty-four pounds. The broadest side of these was more or less flat, and when wielded by two or three men they were capable of giving a very effective blow. Their use would have been for breaking the rude blocks into more or less regular forms; and consolidating the rubble foundations. It is specially notable that no ground or polished stone implements were found among them.
Stag's horn pick from Stonehenge.
In addition to the stone tools, picks of deer horn were employed for quarrying the chalk when making the foundations of the uprights. Those who are familiar with the antlers of the deer, will recall the sharp pointed tine, known as the "brow tine," which projects forward from the horn above its core or socket. This was the tooth of the pick, all other tines being sawn off; thus transforming the antler into a very rough implement closely resembling a pick, with a single point. Many splinters from these picks were found actually embedded in the chalk of the foundations, and one entire discarded example was discovered showing great signs of use, the brow tine being worn away to a considerable extent.