[SEAL, WALRUS, AND WHALE HUNTING.]

The staple food of the Central Eskimo is the seal, particularly Pagomys fœtidus. The methods of hunting this animal differ materially at different seasons, as its mode of life depends on the state of the ice.

Fig. 390. harpoon from Alaska.
(American Museum of Natural History,
New York.)
Fig. 391. Modern unang or sealing harpoon.
(Museum für Völkerkunde,
Berlin. IV A 6729.)

In the winter it takes to the smooth parts of the floe a few miles from the coast, where it scratches breathing holes through the ice, in which it rises to blow. It shuns hummocky ice and floes of more than one year’s age. Wherever the edge of the ice is at a great distance from the settlements, the only way of procuring seals is by watching for them at these holes. For the pursuit a light harpoon is used, called unang. The shape of this weapon has been somewhat changed since the introduction of rod iron. Formerly it consisted of a shaft having at one end an ivory point firmly attached by thongs and rivets, the point tapering toward the end. The point was slanting on one side so as to form almost an oblique cone. Thus it facilitated the separation of the harpoon head from the unang. On the opposite end of the shaft another piece of ivory was attached, generally forming a knob. The material used in making the shaft was wood, bone, or ivory, according to the region in which it was manufactured. In Iglulik and in Aggo the narwhal’s horn was the favorite material for the whole implement, a single horn being sufficient to make a whole shaft. Wherever wood could be procured small pieces were ingeniously lashed together. As the shaft is apt to be broken by the struggles of the animal when struck by the weapon, it was strengthened by a stout thong running along the whole length of the shaft. In all other respects the old design corresponds to the modern one. Unfortunately I have seen no specimen of this description, but a figure may be seen in Ross II, p. 272, in the hand of one of the natives. In Alaska a similar harpoon is in use, a specimen of which is represented in Fig. 390. It consists of a wooden shaft, with a stout ivory point at the lower end and another at the upper end. Both are fastened to the shaft by whalebone strings. In the upper end a slanting ivory point is inserted, which serves for attaching the harpoon head to it. The whole shaft is strengthened by a seal line, as shown in the figure.

The unang now in use in Baffin Land and on the western shore of Hudson Bay (Fig. 391) consists of a wooden shaft into which an iron rod (unartenga) is sunk. The latter is pointed at the end (see, also, Fig. 393) in about the same way as the old ivory implement. The socket is secured by a small ivory ring (unaqiuta) or a string wound around the end of the shaft. In the socket close to the iron rod a bent nail is inserted, forming a narrow eye (tagusiarbing). Near the center of the whole implement a small piece of ivory (tikagung; see, also, [Fig. 418]) is fastened to the shaft, forming a support for the hand when throwing the weapon. At the lower end of the shaft a string of deer sinews or a thong is fastened, forming a loop (nabiring) which passes through a hole drilled through the shaft. A stout iron point is also attached to the lower end of the shaft (tounga).