PART PAGE
B
Bevel I, [44]
Bevels, application of in fitting wreaths to rail I, [58]
Bevels to square wreaths I, [60]
Bottom steps with obtuse-angle plan I, [56]
Bullnose stair I, [33]
Bullnose steps I, [32]
Bullnose tread I, [29]
C
Carriage I, [16]
Carriage pieces I, [28]
Circular stairs I, [25]
Close stairway I, [ 2]
Cove I, [28]
Curved steps and stringer, plan of I, [54]
Cylinder I, [35]
D
Dog-legged stairs I, [25]
F
Face-mould I, [68]
Face-mould developing (obtuse-angle plan) I, [56]
Flyer I, [25]
Foci I, [70]
G
Geometrical stair I, [44]
Geometrical stairways and handrailing I, [43]
K
Kerfing I, [36]
N
Newel post I, [14]
O
Open-newel stairs I, [32]
P
Pitch-board I, [10]
Plan lines I, [48]
Platform I, [20]
Platform stairs I, [26]
Projection I,[44]
Q
Quarter-space stair with six winders I, [43]
Quick sweep I, [37]
R
Rail, plan line of I, [46]
Rise and rim I, [ 3]
Riser I, [ 3]
arrangement of I, [74]
Rough brackets I, [28]
S
Springing the plank I, [74]
Stair with five dancing winders I, [43]
Stair-building I, [1-75]
definitions I, [ 2]
introductory I, [ 1]
laying out I, [22]
open-newel stairs I, [32]
platform I, [20]
stairs with curved turns I, [34]
strings I, [ 7]
housed I, [ 7]
notched I, [ 8]
open I, [ 7]
rough I, [ 7]
staved I, [ 8]
well hole I, [18]
Stairs, plans and elevation turning around central post I, [44]
Stairs, setting of I, [ 8]
Stairs, types of in common use I, [41]
Steel square II, [1-27]
applied in roof framing II, [ 7]
applied to jack rafter II, [17]
back II, [ 1]
back of blade, showing essex board measure II, [ 3]
back of blade, showing rafter table II, [ 2]
back of tongue, showing brace measure II, [ 3]
bevels, method of finding for all timbers in roofs of equal pitch II, [20]
blade II, [ 1]
board measure II, [ 1]
brace rule II, [ 1]
common rafters, method of laying out II, [11]
face II, [ 1]
face side of tongue, showing octagon scale II, [ 2]
finding backing of hip in gable roof II, [22]
finding length of rafter for front wing in roof shown in Fig. 36 II, [24]
finding length to shorten rafters for jacks per foot of run II, [18]
giving various pitches to foot of run II, [10]
heel cut of common rafter II,[13]
hips II, [13]
hips and rafters for roofs of various pitches over square corner,
method of laying out II, [12]
hips and valleys, how to treat the heel cut of II, [16]
hips and valleys of a ⅜-pitch roof, method of laying out II, [11]
jack rafter, finding length of II, [18]
jacks between hips and valleys, method of determining length II, [19]
laying out timbers of one-half gable of ⅜-pitch roof II, [22]
laying out timbers of roof with two unequal pitches II, [23]
method of finding bevels for purlins in equal-pitch roofs II, [27]
method of finding length and cuts of octagon hips
intersecting a roof II, [25]
octagon scale II, [ 1]
rise and run II, [ 1]
tongue II, [ 1]
use of to find miter of equilateral triangle II, [ 6]
use of to find miter of hexagon II, [ 7]
use of to find miter and side of pentagon, hexagon and octagon II,[4], [5]
Story rod I, [ 8]
Straight flights I, [25]
String-board I, [ 3]
Strings I, [ 7]
housed I, [ 7]
methods of building up I, [37]
notched I, [ 8]
open I, [ 7]
rough I, [ 7]
staved I, [ 8]
T
Tangent inclined-lower tangent level I, [63]
Tangent system I, [44]
Tangents and face-mould, diagram of I, [53]
Tangents unfolded I, [50]
Tread I, [ 3]
Treads and risers, housing of I, [13]
Trimming joists I, [19]
Twisted wreath raised to position I, [57]
W
Well-hole I, [18]
Well-hole connecting two flights I, [51]
Winder I, [25]
Winding stairs I, [25]
Wreath, cutting from plank I, [57]
Wreath with two equally inclined tangents, finding bevels for I, [59]
Wreath twisted, ready to be moulded I, [57]
Wreaths I, [44]

Transcriber's Notes:

The illustrations have been moved so that they do not break up paragraphs and so that they are next to the text they illustrate.

Typographical errors have been silently corrected.

INDEX has been added to Table of Contents.