Originally the printer did everything except to make his paper and his presses. He designed and cast his type, he made his ink, he edited his manuscript, printed his books, bound them, and, for a time, sold them. We have just considered his relations to the bookseller. He got rid of his type casting about one hundred years after the invention. The type foundry of Guillaume Le Bé, established about 1551, seems to have been the beginning of type founding as a separate industry, although in later years some very large establishments maintained type foundries and even paper mills as incidents of the business; but the printer from this time on began to get his type outside.
Bookbinding came to be regarded as a separate industry at about the same time.
Ink making was done by the printer until comparatively recently. The ink balls which were used for distributing the ink on types were made by the printers themselves until the ink ball was superseded by the roller with the coming in of modern presses. Even then rollers were made in the shops for a long time, and indeed the practice is hardly now entirely discontinued.
The early paper was hand-made and was thick, with a rough, furrowed surface. It was grayish or yellowish in color and was very strongly water-marked. It was very costly, but very durable. It was heavy and hard to handle, especially as it was handled without mechanical appliances.
The early types were irregular in face and body as the natural result of being cast in hand moulds from hand cut dies. The early types were cast on large bodies and were used without leads. The point system, which reduced type to uniformity and did away with the annoying irregularity in size of the old types, did not come into existence until the middle of the eighteenth century, three hundred years after the invention of printing. Of course, all composition throughout this period was done by hand. Women were employed as compositors as early as 1500, but they apparently disappeared from the industry before long, as we find no evidence of their presence after the reorganization of 1618 or for some time before that.
The press was substantially the old screw press of Gutenberg in which the platen was forced down onto the bed by the direct pressure of a screw. A few improvements had been made. A sliding bed was introduced in 1500. A copper screw (more effective and durable than the old wooden screw), tympan, and frisket were added in 1550, and the so-called Dutch press, which did away with the necessity of raising the platen by a reverse motion of the screw by substituting leverage for it, was introduced in 1620. These were the only improvements of any note which were made before the introduction of the Stanhope press about 1800. Of course, the presses were worked by hand power and it will be seen that the setting up of the screw or the throwing of a lever with sufficient force to insure a good impression was an extremely laborious task. It was sometimes dangerous, as the screw bar or lever was liable to break when the workman’s weight and strength were thrown upon it, resulting in serious injuries.
The ink was good—well-aged linseed oil, boiled until viscous when cool, and mixed in a mortar with resin black. It was mixed in the proportion of thirty-two ounces of oil to five ounces of black. Of course, it was variable, its quality depending upon the quality of the ingredients and the care exercised in preparation. It was spread on the type by means of balls of leather stuffed with wool and firmly attached to wooden handles. One of these balls was taken in each hand, a small portion of ink was spread evenly over the balls by rubbing them together, and the ink ball was then passed over the type so as to distribute the ink as evenly as possible.
Composition was done by the full page. This was a fairly reasonable method of reckoning, as the kinds of printing were not varied as they are now. Compositors worked “on honor” and were paid by time. Payment by ems is a very late advance, not having been adopted until about 1775.
Imposition was done practically as now.
The pressman’s day began by the preparation, through softening and cleaning, of the balls which were to be used on the day’s run, and the mixing of the amount of ink considered necessary for the day’s work. Make-ready, adjustment of margins, register, and the like had to be attended to before the impressions could be taken. Meanwhile the paper had been dampened. The old screw press could not print on dry paper. Paper came from the mill in “hands” or packages of twenty-five sheets, folded once and laid inside each other as note paper is now sold by the stationer. A “hand” was dipped in a tub of water. It was then taken out and the sheets were placed flat under weights to squeeze out the superfluous water and keep the sheets in shape. After the water had been squeezed out the sheets were re-folded into “hands” and sent to the pressroom to be placed upon the press while still damp.