A set of glass tubes, l, three in number, to contain tadpoles, water newts, small frogs, eels, &c. which are curious objects for affording a fine view of the circulation of the blood, &c. They are also to be placed in the slider-holder K. There is a small hole at one end to admit air, the other end is to be stopped with cork, to contain the fluid and prevent the escape of the animal. A brass twisted wire is sent, to assist in the cleaning of these tubes.
A small ivory box, m, containing talcs and wires to supply the ivory sliders with, should any be lost or damaged.
A lens set in a brass cell, n, of such a focus as to view objects under a magnifying power sufficient for the applying them to the instrument for further inspection; hence it has been called the explorator. It may occasionally be screwed to the arm C D, and is then well adapted for viewing objects of the larger kind, or the whole of an insect, &c. before the observing of it in part under the regular magnifiers.
A concave, or a circular plane glass, o, for transparent objects, or animalcula in fluids, &c. it is fitted to the side, I, of the stage.
It is necessary to describe the lens and frame, d, noticed at [page 95]; it is either for converging the sun’s rays upon opake objects laid upon the stage, or for magnifying a flower, or other large objects applied to the stage, or on the nippers or point, b. By its pin and spring socket it is easily raised to any height, for the sun, candle, or the eye of the observer.
A brass insect box, h, consisting of a concave and plane glass that screw close together; by means of which a louse, flea, &c. may be secured, viewed alive, and retained for any time. It is applied to the hole I, of the stage, Fig. 1.
A pair of small brass forceps, q, by which any small object may be conveniently taken up or moved.
This microscope packs into a mahogany pyramidical shaped case, about seven inches square at its base, and fourteen inches in height. For its price, see the general [list] annexed to this work.
TO USE THIS MICROSCOPE.
It will be obvious to the reader from the preceding description that it must be put together as represented in the figure; that he has to place the slider-holder, K, to the stage, N I S, with one slider of objects; to reflect as strong a light as possible from the concave mirror, O, below, by turning it into the best position, and moving it upwards or downwards all the while he is looking down the body, A B. Then, for a distinct view of the object, to turn the pinion, M, in a slow and gentle manner. A small degree of practice will render the management very familiar.