In one type of serpent ring, one of the ends is inserted loose into the mouth of the serpent’s head terminating the other end, so that by a little careful bending, the trifling difference in the diameter of the hoop necessary to adjust it perfectly to a finger can be easily attained. This form already appears among ancient rings.[150]
Two finely wrought serpent rings are shown on the Plate.[151] In one of these (No. 2), with three coils, the erect head of the snake with distended jaws is vividly portrayed, making the ring a work of art indeed, but arousing an instinctive repulsion in the beholder. The other serpent ring constitutes a simple circlet, the head of the snake overlapping the tail. As an example of artistic workmanship it fully equals the larger ring, and may be considered better adapted for the adornment of the hand, since the serpent nature is not so aggressively presented.
Rings of a quite unique type, that owes its origin to the great war and to French skill and taste in adapting the most unpromising means to an artistic end, are those made by French soldiers out of aluminum fuses taken from the bombs which their German foes have so liberally rained upon them. At the outset the disks were first worked with scissors to make rude rings for men’s big fingers. Later on the well-furnished tool-box of the machine-gun squad was called into requisition. This early primitive type was soon abandoned, and in order to make rings of the proper dimensions the metal from the German shells was fused and run into ingots; the crucible was frequently one of the new iron helmets, which was set on a wood fire that was kept going by a bellows improvised from a bayonet sheath. However, the soldiers finally became so reckless in their search for material that it was found necessary to put a stop to this, after several had been shot by the enemy.
1, mourning ring. Gold with enamel and jewels, Seventeenth Century. 2, snake ring. Carved gold with diamond eyes. Modern Oriental. 3, Chinese ring. Native gold with seal reading, “Riches and public honors.” Overlapping back. Nineteenth Century. 4, wish-bone ring. Copy of an African one in gold. 5, Persian ring. Gold and silver, set with a carnelian having seal characters of owner’s name. Metal engraved inside. Eighteenth Century. 6, Chinese ring. Native gold with seal reading, “Long life and riches.” Overlapping back. Eighteenth Century. 7, animal ring. Carved gold in two colors with continuous procession of tigers. Modern French. 8, Chinese ring. Of greenish jadeite in one piece. Eighteenth Century.
Rings from the Collection of W. Gedney Beatty
THREE TYPES OF WATCH RING
Front, side and end views
The first models for the rings were made of wood or soft limestone. At a more advanced stage, round bars were made, which were cut into sections by means of the jagged edge of an old trench-spade. The smoothing off was done with a knife, and for making the ring apertures a pick was commonly used. They were then polished with a piece of hard wood, moistened from time to time to soften it.