224. Suspension bridges of large span have been generally considered as entirely unfit for railroad purposes; but John A. Roebling has proved the contrary by erecting a wire suspension railroad bridge of eight hundred feet clear span across Niagara River; which with heavy loads and violent gales has shown itself to be both stiff and strong to any desired amount. The construction of a bridge upon any other plan would have been hardly possible at the site of Mr. Roebling’s Niagara bridge, there being no opportunity for scaffolding or for piers, pontoons or hydraulic presses.
The simple road-way supported by cables, possesses great strength with very little stiffness. It must be accompanied by stays and trusses to check vibration.
No bridge involves more simple calculations, and in none can we proceed with more absolute safety, than in the wire suspension. European suspension bridges are generally formed of cables made by linking bars of wrought iron together. This method is more expensive and more liable to failure than the American plan of forming cables of iron wire. An apparently good bar may be defective inside, while we are sure of every component fibre of the cable; indeed it is very little trouble to test each wire as it is laid into the cable.
The parts to be considered in proportioning a suspension bridge are
The anchoring masonry,
The anchor chains,
The towers and plate,
The suspension cables,
The suspending rods,
The stiffening arrangement,