Something about sugar

by George M. Rolph

CULTIVATION

The purpose of cultivation is two-fold; first, to retain the moisture in the soil, and, second, to destroy the weeds and grass, as in the early stages of the growth of the beets weeds might spoil the stand by choking the plants.

Cultivation should be continued until the plants have attained such a size that the leaves cover the ground. It increases the fertility of the soil by opening the land to the atmosphere, thus facilitating the penetration of oxygen and absorption of air moisture and the resulting decomposition and assimilation of nutritious elements.

HARVESTING AND TOPPING

The time when harvesting takes place depends on the many factors that influence the growth and maturing of the beet. In the colder countries the harvesting lasts from September until the ground becomes frozen, while in warmer climates like that of California, where the seed is planted early, harvesting begins about July first and lasts for a period of from seventy-five to ninety days.

The beets are first loosened by means of a specially shaped plough, called the “puller,” which lifts them from the ground. They are then picked up by hand and the crown of each beet, together with the leaves, is cut off with a large knife. The leaves contain no sugar, and are, therefore, not taken into the factory, but are utilized for stock feeding, being quite valuable for this purpose. The sugar contained in the crown is accompanied by so many organic salts that it does not pay to extract it.

The topped beets are then loaded into wagons or railroad cars and transported to the factory, at which point they are carefully weighed. In this country most of the beets are raised by farmers and sold under contract to the factories, at so much per ton, so that the determination of the exact weight and sucrose content is important. For the season of 1915 the average price paid to the farmers for beets was $5.67 per ton.

On arrival at the factory a certain number of beets are taken from every wagon- or car-load, and these represent a fair average of all the beets of that particular delivery. They are sent to the laboratory and their exact weight ascertained, after which they are trimmed of all adhering roots, leaves and parts of the crown, if not properly topped in the field. Any remaining soil is carefully brushed off and the beets thoroughly cleaned. They are then reweighed and the difference between this and the first weight is the tare. This difference represents a certain percentage of the total of the sample beets weighed, and that small percentage is deducted from the gross weight of the total load. In this way the exact net weight of beets delivered by the farmer is determined and he is paid according to this net weight.

The sugar content of the beet and the purity of the juice must now be ascertained, for the price paid the farmer varies according to the amount of sugar the beet contains. As in the case of weighing, sampling and polarizing raw cane sugar, representatives of both parties—the farmer and the factory—are present when all weights are taken and tests made. There are several different methods for determining the percentage of sugar in the beet and the purity of the juice, but the following gives a fair idea of the general practice.