Thus—too little air, acetic acid and aqueous vapour prevents the formation of the hydrated sub-acetate and consequently sub-carbonate of lead. Too much acetic acid and aqueous vapour, and too little air forms an acetate on the surface of the lead, which, by the excess of water, dissolves and wastes, and washes the lead; it also varnishes the surface of the lead with a coating of acetate, and checks, if it does not completely prevent, the formation of sub-acetate of lead, and consequently the formation of carbonate and sub-carbonate of lead. Similar rules hold good in the case of nitric acid and the formation of nitrate and sub-nitrate.
The process of forming the hydrated sub-acetate or sub-nitrate of lead is most energetic at a temperature of 120°-130° F. In a lower temperature, a much longer time is occupied in carrying out the process of conversion; while at a higher temperature the delicate sub-acetate or sub-nitrate of lead first formed suffers loss of water, until, at 212° F., it is completely dehydrated. At a temperature about 135° F., the power of forming carbonate and sub-carbonates is lessened, and at 212° F. is considerably diminished. The carbonate itself is dehydrated at 212° F., and is decomposed at a higher temperature.
To obtain a white lead of excellent quality for its various uses, it is necessary to produce a substance which possesses sufficient body to cover surfaces to which it may be applied as paint, and it must possess sufficient base to combine with the oil of the paint to form a vehicle or varnish to retain and hold the body on the surface. This is found to be the case with sub-carbonate of lead, or especially with a compound constituted of two or three equivalents of carbonate of lead, with one equivalent of hydrated oxide of that metal.
Lead, to be attacked by chemical agents, should possess a clean surface. If the surface of the lead is chemically clean, so much the better. The surface of the lead should be extended as much as possible, and exposed to the action of the gases and vapours at a certain heat for its conversion into white lead.
If the most favourable conditions are sought, the temperature should be between 120° and 130° F.; and to carry on the chemical action most satisfactorily, the lead during its conversion should present a granular coating—that is, the coating formed by the chemical agents should be granular and not smooth and continuous in character. It should be porous, and not of a continuous varnish-like or vitreous character.
To rapidly carry on the chemical action, the chemical agents should be well diffused and commingled throughout each other, and the blue lead should be so exposed as to be open to their attack on all parts of its surface equally, and all should be at, and kept at, a proper temperature and a proper degree of humidity. Too dry a heat prevents the process of conversion. Too moist an atmosphere wastes the materials and arrests their action. The conditions, therefore, which are most favourable will be a certain humid atmosphere of well diffused and commingled vapours or gases, acting on metallic lead exposed to them under the physical conditions described, and at a temperature between 110° and 135° F.
These favourable conditions can be further augmented by certain electrical arrangements in connection with them.
Again, in the sources from which the carbonic acid is derived, and in the arrangement of the apparatus for applying the carbonic acid, favourable and unfavourable conditions can be imported. Thus, by using paraffin, petroleum, benzine, or light oil of paraffin or petroleum, or similar carbonaceous substances free from sulphur, or mixtures of such carbonaceous substances either alone or mixed with air or other oxidising substance, comparatively pure carbonic acid may be furnished without at the same time producing any objectionable compounds.
As a result of his researches and experiments, Prof. Gardner has proposed (Eng. Pat. 1882, No. 731) certain improvements in the method of converting blue lead into white lead, in the apparatus employed, and in the method of making and applying the carbonic acid used in the process. Some of these improvements are applicable to the open stack or chamber process, while others relate to closed chambers.
Preferably, for the conversion of blue lead into white lead, Prof. Gardner adopts a closed, but not air-tight, chamber. This chamber is ventilated or relieved so as to enable the incoming gases and vapours to enter it without hindrance, and to escape by means of an exit valve and pipe, or an exit shaft, connected with the chamber, communicating with the exterior air, and regulated by a valve or damper. The gases and vapours within the chamber can find their way out by this exit shaft only, by slight pressure on expansion from within the chamber; thus the interior of the chamber is preserved from disturbance, by preventing the formation of currents within its atmosphere, and yet a perfect circulation of the gases and vapours is kept up.