In the closing years of the nineteenth century appeared the forerunners of airships as they are to-day, and interest was aroused in this country by the performances of the ships designed by Santos-Dumont and Count Zeppelin. From now onwards we find various British firms turning their attention to the conquest of the air.
In 1903 Dr. Barton commenced the construction of a large non-rigid airship. The envelope was 176 feet long with a height of 43 feet and a capacity of 235,000 cubic feet; it was cylindrical in shape, tapering to a point at each end. Beneath the whole length of the cylindrical portion was suspended a bamboo framework which served as a car for the crew, and a housing for the motors supplying the motive power of the ship. This framework was suspended from the envelope by means of steel cables. Installed in the car were two 50 horse-power Buchet engines which were mounted at the forward and after ends of the framework. The propellers in themselves were of singular design, as they consisted of three pairs of blades mounted one behind the other. The were situated on each side of the car, two forward and two aft. The drive also include large friction clutches, and each engine was under separate control.
To enable the ship to be trimmed horizontally, water tanks were fitted at either end of the framework, the water being transferred from one to the other as was found necessary.
A series of planes was mounted at intervals along the framework to control the elevation of the ship.
This ship was completed in 1905 and was tried at the Alexandra Palace in the July of that year. She, unfortunately, did not come up to expectations, owing to the difficulty in controlling her, and during the trial flight she drifted away and was destroyed in landing.
WILLOWS No. 1
From the year 1905 until the outbreak of war Messrs. Willows & Co. were engaged on the construction of airships of a small type, and considerable success attended their efforts. Each succeeding ship was an improvement on its predecessor, and flights were made which, in their day, created a considerable amount of interest.
In 1905 their first ship was completed. This was a very small non-rigid of only 12,500 cubic feet capacity. The envelope was made of Japanese silk, cylindrical in shape, with rather blunt conical ends. A long nacelle or framework, triangular in section and built up of light steel tubes, was suspended beneath the envelope by means of diagonally crossed suspensions.
A 7 horse-power Peugeot engine was fitted at the after end of the nacelle which drove a 10-feet diameter propeller. In front were a pair of swivelling tractor screws for steering the ship in the vertical and horizontal plane. No elevators or rudders were fixed to the ship.