Fig. 211.—Stemmed chipped flint.
K. Edges usually convex, sometimes nearly straight, gradually rounding off into the stem, which may be straight, tapering, or slightly expanding; base straight or slightly convex. All of these are narrow, mostly thick, and none over two inches long. The type ([figure 211]) is from Bledsoe county, Tennessee; others are from eastern Tennessee; western and central North Carolina; Coosa valley, Alabama; northwestern Georgia; eastern, southern, and southwestern Wisconsin; Kanawha valley, West Virginia; South Carolina; Brown county, Illinois; and northeastern and southeastern Arkansas.
Fig. 212.—Stemmed chipped flint.
L. Edges convex, a very few being straight; shoulders square or somewhat rounded, in two or three somewhat expanding. Stem usually straight, sometimes tapering; base straight or convex. Varying much in size and relative width, being from 1¼ to 4½ inches long, and from ¾ to 2½ inches wide; some slender, others broad. Nearly all are quite roughly made. Illustrated in [figure 212] (from Cherokee county, Georgia).
Like many other forms of small chipped implements, the distribution in this type is wide. It comes from northwestern Georgia and about Savannah; Kanawha valley, West Virginia; Miami valley, Ohio; southwestern Illinois; western and central North Carolina; eastern Tennessee; northeastern Alabama and Coosa valley in the same state; and southwestern Arkansas.
M. Convex edges; sharp points; very slight shoulders; stem tapering by curved lines; base convex or somewhat pointed. All made of quartz, quartzite, or coarse flint, and differing from the following group only in being very slender and, owing to the material employed, much more roughly finished. Found in western North Carolina, in South Carolina, and in southwestern Arkansas.
N. Convex edges; remarkably symmetrical outline; most specimens finely finished; slight shoulders; tapering stem, with convex base, the whole stem having a quite regularly curved outline. From 2 to 4½ inches long.
