1 main spring. 1 hammer. 1 cartridge extractor and spring. 1 sear spring. 2 firing pins. 2 firing pin springs. 2 firing pin lock pins. 2 shell extractors. 2 shell extractor springs. 2 shell extractor pins. 2 handle locks. 2 bolt pins. 2 trigger springs. 4 cotter pins for piston-pin. 1 piston spring.
Accessories.
1 oil can. 1 combination spanner and screwdriver. 1 jointed cleaning rod. 1 combination operating handle and screwdriver 3 drifts.
Instructions for Operation.
Attach box in firing position on the left side of mount.
To Load.—Push belt through opening above the box from the left and draw it as far as it will go. Let go the belt. (Never pull on the belt while the gas lever is being operated.) Swing the gas lever downward to the rear until it strikes the bottom plate of the gun. Release gas lever, when it will resume its normal position.
The gun is now ready to fire.
To Fire.—Hold back trigger. The firing will continue until the trigger is released or until all the cartridges in the belt are fired.
To hold the gun ready for firing, push the safety latch on right side of gun below rear sight from “fire” to “safe.”
To Draw Belt and Cartridges from the Gun.— Push forward the knurled head on the right side of the gun near the belt exit and draw the loaded belt out to the left. Then operate the lever once by hand, as in loading, ejecting the loaded cartridge that remains in the chamber.