MIRROR SUPPORT
- 1 walnut piece, 7/8 by 1-3/4 by 20-1/2 in., S-2-S.
- 1 walnut piece, 7/8 by 1-1/2 by 18 in., S-2-S.
- 1 oak piece, 3/4 by 1-1/4 by 10-1/2 in., S-2-S.
- 2 oak pieces, 7/8 by 1-1/2 by 11 in., S-2-S.
- 1 walnut bracket piece, 7/8 by 1-1/4 by 5 in., S-2-S.
MIRROR FRAME PARTS
- 2 walnut pieces, 7/8 by 1-1/2 by 12-1/2 in., S-2-S.
- 2 walnut pieces, 7/8 by 1-1/2 by 10-1/2 in., S-2-S.
- 2 oak pieces, 1/4 by 3/8 by 10 in., S-4-S.
- 2 oak pieces, 1/4 by 3/8 by 8 in., S-4-S.
- 1 back, 3/16 by 8 by 10 in., soft wood.
- 2 cleats, 3/8 by 1-1/4 by 8 in.
- 1 plain mirror glass, 7-1/2 by 9-1/2 in.
Details of Dresser
Begin by planing the four posts to length. The lower ends should be slightly beveled to prevent their slivering. Cut the mortises for the tenons that are on the ends of the side rails. These rails are to be 7/8 by 2 in. and the tenons should be 3/8 by 1-1/4 in. wide by 3/4 in. long. The posts should be rabbeted down to their middles to a depth of 3/8 in. so as to receive the 1/4-in. end panels. The end rails should be cut to length and their tenons worked after one edge of each has been rabbeted as were the posts.