PAGE
INTRODUCTORY NOTE[1]

CHAPTER I.

Anatomical Structure of Hide[2]

CHAPTER II.

Chemical Composition of Hide[17]

CHAPTER III.

Commercial Tanning Materials[23]

CHAPTER IV.

The Chemistry of Tannins[57]

CHAPTER V.

Water as used in Tanning[83]

CHAPTER VI.

Methods of Chemical Analysis for the Tannery[90]

CHAPTER VII.

Sole-leather:—Preparing the Hides[132]

CHAPTER VIII.

Sole-leather:—Unhairing Hides[139]

CHAPTER IX.

Sole-leather:—Tanning Materials[157]

CHAPTER X.

Sole-leather:—Treatment in the Tan-house[169]

CHAPTER XI.

Sole-leather:—Treatment in the Shed[17]9

CHAPTER XII.

Dressing Leather[184]

CHAPTER XIII.

Currying[193]

CHAPTER XIV.

Enamelled, Patent, or Japanned Leather[203]

CHAPTER XV.

Morocco Leather[206]

CHAPTER XVI.

Russia Leather[208]

CHAPTER XVII.

Chamois or Wash-leather[210]

CHAPTER XVIII.

Crown Leather, or Preller's Leather[213]

CHAPTER XIX.

Mineral-tanned Leather[218]

CHAPTER XX.

Calf-Kid[223]

CHAPTER XXI.

Glove-Kid[225]

CHAPTER XXII.

Construction and Maintenance of Tanneries[231]

CHAPTER XXIII.

Drying-sheds for Leather[243]

CHAPTER XXIV.

Commerce, Statistics, and Bibliography[255]


Index[275]

A
TEXT-BOOK OF TANNING
ETC., ETC.

INTRODUCTORY NOTE.

Leather manufacture may be broadly divided into two stages: "tanning," in which the raw hide is converted into the imputrescible and more or less flexible material known as "leather"; and "currying," in which this leather is further manipulated, and treated with fatty matters, to soften and render it more waterproof, and to improve its appearance. Glove-kid, and certain other leathers, however, are not tanned at all, but "tawed," or prepared with a mixture in which alum and salt are the most active ingredients; chamois, "shammy," or "wash" leather, is produced by fulling with oil alone, and many leathers can scarcely be said to be curried, although more or less oil is used in the final processes of "finishing" or "dressing." The first subject to be treated of in this work will be the operation of tanning, properly so called, taking for example the tannage of sole- and belting-leather. This demands thorough explanation, in both its practical and theoretical aspects, not only because it is one of the most important branches of the trade, but because the principles involved are those which equally underlie all other tanning methods. The next to be dealt with will be the modifications of the process which are necessary in tanning the more flexible leathers used for boot-uppers, hose-pipes, and saddlery purposes; then the currying of these leathers; and finally, the manufacture of moroccos, Russian, and japanned leathers, calf- and glove-kid, &c.