Hours, Wages, and Conditions of Work

The hours and wages of labor are the same as for the machine operators and bench men, the hours ranging from forty-eight to fifty-four a week.

The position of the assembler or erector is very important. There is no possibility of his being displaced by the introduction of machinery. The increase of production will demand more men, but it is fair to say that there are very many men who are qualified to fill the lower grades of work in this occupation. Only through experience and training on the job can men learn to be competent machinist erectors. These men hold responsible positions in industry and there is a constant demand for competent men.

Handicaps

The workman in this branch of the trade must be active and have physical strength, good eyesight, and considerable skill in the use of hand tools. He should know something about machine-tool processes, and may find it necessary to operate machines on occasion. Any handicap must be considered from the point of view of the man and the job he expects to take. If the man has had experience in the given line of work and wants to reenter it, he will be a very good judge of his own ability.

Nearly every disabled man who has previous experience in a machine shop will find it possible to use this experience to advantage.

Handicapped men who are preparing to enter this occupation may be trained in special classes in the factory where the work is done. A group of ten or twelve such men may be taken to a large factory and trained for special jobs under the instruction of a practical teacher.

PLAN No. 926. THE PRACTICE OF OPTOMETRY AND THE TRAINING IT REQUIRES

Acknowledgment

The material of this monograph was compiled by S. Reid Warren, editor of The Keystone Magazine of Optometry, assisted by several successful practicing optometrists, to whom acknowledgment is gratefully accorded. The monograph has been prepared under the direction of Charles H. Winslow, Chief of the Research Division of the Federal Board for Vocational Education. Acknowledgment is due Dr. John Cummings, of the Research Division, for editorial assistance.