| No. 0 | 1 | 2 | 3 | |
| Distance between table and chuck | 4 in. | 5 in. | 9 in. | 9 in. |
| Distance between frame and spindle | 1¾ in. | 4 in. | 6 in. | 6 in. |
| Total Height | 20 in. | 23 in. | 30 in. | 32 in. |
| Drills holes up to | ¼ in. | ⅜ in. | 9/16 in. | ¾ in. |
| Chuck admits up to about | 5/32 in. | ¼ in. | ⅜ in. | ½ in. |
| Price | 18/3 | 24/0 | 31/6 | 36/9 |
| Parallel Vice Extra | — | 4/6 | 4/6 | 4/6 |
| Set of Six Assorted Drills | 0/9 | 0/9 | 1/5 | 1/5 |
No. I R 123. Grindstone mounted on Cast Iron Trough, with screw at bottom to let water off.
| Size of Stone | Without Hood. | With Hood. | ||
|---|---|---|---|---|
| Ordinary Bearings | Roller Bearings | Ordinary Bearings | Roller Bearings | |
| 16 × 3 | £1 9 0 | £1 12 6 | £1 12 9 | £1 15 3 |
| 18 × 3 | 1 10 6 | 1 13 9 | 1 15 0 | 1 16 9 |
| 20 × 3 | 1 15 0 | 1 16 9 | 1 19 3 | 2 1 6 |
| 22 × 3½ | 2 0 0 | 2 2 3 | 2 5 3 | 2 7 6 |
| 24 × 3½ | 2 3 9 | 2 6 0 | 2 9 3 | 2 11 6 |
| Sent direct from works, carriage forward. | ||||
“GOODELL” CHUCKS. No spanner wrench is required with this chuck.
| No. | Holding | Price with straight shanks ½ or 41/64 in. | Price with Morse taper diam. shanks No. 1 or 2 |
|---|---|---|---|
| 14 | 0 to 5/32 in. | 5/6 | 7/6 |
| 15 | 0 to ¼ ,, | 7/6 | 9/6 |
| 15½ | 0 to ⅜ ,, | 11/6 | 13/0 |
| 16 | 0 to ½ ,, | 15/0 | 17/0 |
C W BURTON GRIFFITHS
LUDGATE SQUARE
LONDON EC.
No. I R 114. Amateurs’ Stocks and Dies. Whitworth Thread.
No. 1 cuts ⅛, 5/32, 3/16, 7/32, ¼, 9/32, 5/16, 24/3
No. 2 cuts 1/16, 3/32, ⅙, 5/32, 3/16, ¼, 24/3