For reasons which will be explained later, ordinary turbines cannot be reversed, but Tesla's invention can run backward just as easily as forward. The reverse action is accomplished simply by placing another nozzle inlet on the other side of the rotor so that the steam can be turned off from the right side of the engine, for instance, and turned into the left side, immediately reversing its direction, with the change in the direction of the steam. The action is instantaneous, too, for as we saw in the experiments Tesla showed us, the turbine began to run at practically top speed as soon as the steam was turned on.
The disks in the little 110-horsepower engine which we saw, were only a little larger than a derby hat were only nine and three quarter inches in diameter, while in his larger turbines he simply increases the diameter of the disks.
Tesla further explained that the 110-horsepower turbine represented a single stage engine, or one composed simply of one rotor. Where greater power is required he explained that it would be easy to compound a number of rotors to a double, or triple or even what he calls a multi, or many stage, turbine. In engineering the single stage is called one complete power unit, and a large engine could be made up of as many units as needed, or practicable.
"Then do you mean to say," Tesla was asked, "that the only thing that makes the engine revolve at this tremendous speed is the passage of steam through the spaces between those smooth disks?"
"Yes, that is all," he answered, "but as I explained before, the steam travels all the way from the outer edge to the centre of the disks, working on them all the time; whereas in the ordinary turbines the steam only works on the outside edge, and all the rest of the wheel is useless. By the time it leaves the exhaust of my engine practically all the energy of the steam has been put into the machine."
This is only one of the many advantages that Tesla points out in his invention, for the turbine is the exemplification of a principle, and hence more than a mechanical achievement. "With a 1,000-horsepower engine weighing only 100 pounds, imagine the possibility in automobiles, locomotives, and steamships," he says.
Explaining the large engines that he is testing, one against the other, at the power plant, the inventor said:
"Inside of the casings of the two larger turbines the disks are eighteen inches in diameter and one thirty-second of an inch thick. There are twenty-three of them, spaced a little distance apart, the whole making up a total thickness of three and one half inches. The steam, entering at the periphery, follows a spiral path toward the centre, where openings are provided through which it exhausts. As the disks rotate and the speed increases the path of the steam lengthens until it completes a number of turns before reaching the outlet—and it is working all the time.
"Moreover, every engineer knows that, when a fluid is used as a vehicle of energy, the highest possible economy can be obtained only when the changes in the direction and velocity of movement of the fluid are made as gradual and easy as possible. In previous forms of turbines more or less sudden changes of speed and direction are involved.
"By that I mean to say," explained Doctor Tesla, "that in reciprocating engines with pistons, the power comes from the backward and forward jerks of the piston rod, and in other turbines the steam must travel a zigzag path from one vane or blade to another all the whole length of the turbine. This causes both changes in velocity and direction and impairs the efficiency of the machine. In my turbine, as you saw, the steam enters at the nozzle and travels a natural spiral path without any abrupt changes in direction, or anything to hinder its velocity."