To make “five ends” plait, five strands are required; these are also set out in a fan like shape, but four of the ends lie parallel towards the right, and one only towards the left; the plaitting begins by turning with either the twisted or the flat fold, the right hand “end” under the “end” nearest to it, over the next one, and under the third, when the left hand “end” is turned under the one just brought from the right, which then becomes the left hand “end,” again beginning with the now right hand “end” and repeating the operation as before. These two processes form the basis for all plaitting, and although any number of “ends” may be used up to the holding capacity of the plaitter and although any change of making the “head” may be adopted, the under and over method is common to all plaitting of braids and hoods. The demand for novelty has caused many variations to be created; the “Twist” head has been described, in addition there are the “one” “two” or “three” or even more “Purl” (or “Pearl”) heads. A “Purl” is a double kind of “Twist” which may occur at every other head or greater intervals. This twist consists of two of the strands or split straws being turned spirally for a sufficient length to form a little half shell at the edge of the plait, the further length of the strand being plaitted into the foot at the desired distance, giving to the finished braid, which is generally of a narrow width, a very pretty effect. Another variety of head which has different applications of the same principle is known as “Feather.” This, although it can be made with whole straws, is generally, and is most effective, made with split straws, and its pattern is a loop or loops of a slightly curved nature formed on the edge of the plait by allowing the right hand “end” or “ends” to miss one or more turns of plaitting, so that when at regular intervals it is, or they are, loosely brought into use, they will form a kind of scalloped edge to the plait.
There are also heads which are known by the number of times plaitting is missed to create a fancy edge. These vary from two to ten, and are made from a sufficient number of “ends” to leave the head of “Under-two” or “Under-ten” or intermediate numbers, as the case may be, with a sufficient “foot” to keep the plait firm for working; the resultant appearance of this method is a plain succession of parallel straws at the plaitting angle to the “foot,” which gives, when sewn, the “foot” being covered, according to the medium used, an entirely “matt” or a brilliantly glossy surface. These “under” plaits can be made with any reasonable number of “ends,” but they are seldom found plaitted with more than sufficient to produce the “under ten.” In order to preserve absolute regularity of length in these head straws, which are actually “in the air,” they are turned over a suitable template, be it of bone, metal, or any thin hard wearing material; this is withdrawn as the plaitting progresses to the further stages of development, but in some cases, especially with split straws, which would not retain any regularity without some support, the template used is a strand of split straw of sufficient width for the number of “under heads,” and is left in the plait to form a permanent strengthener to the pattern. It is completely hidden from sight by the heads folded over it, and although in the wider plaits it is very undesirable, being extremely difficult to turn in small circles, in the narrow grades the objectionable features are more easily overcome.
In addition to these, there is the “saw” edge, a peculiarity of “Rustics,” and of which, as its name implies, one edge, or both edges, present that angular serration which is common to saws. There are also innumerable fancy edges, having as their foundation one or the other of these generic patterns.
The “Foot,” or other part of the braid as distinct from the head, is made in so many ways that room forbids any detailed account: some plaits have none, and one of the most remarkable of this variety may be described. In “English Brilliant,” a widish plait made of a varying number of ends, there is really no “foot,” the plait, of split straws, being all head or pattern. The individuality of “Brilliant” is that once the turn is effected the split straw instead of laying flat across the pattern is made to stand on its edge, giving to the design a look similar to a honeycomb; this is probably the lightest in weight of any straw made plait.
These few types form the basis on which nearly all plaits are made by hand. There are, of course, many others in actual use, one not yet mentioned which, although plaitted in the same way as ordinary flat head 7 end braid, is made with single strands of split straw. The result is a kind of chess board pattern, which shows alternate squares of the outside and the inside of the straw. This has a generic name of “split,” and was one of the earliest developments of English plaitting. Naturally, it is very light in weight, and enjoyed a great sale for many years, being most suitable for “Granny” bonnets.
Other plaits have been made of what is called “Cordinette.” This consists of two strands only, and is plaitted one over the other in recurring fashion, so as to make a kind of narrow concertina. It was at one time used for making small bonnets, but its general application has been for the embellishment of some of the wider grades of plait.
The straw plaits of China, and especially Japan, are all made on the above lines, their extra beauty and lightness, combined with the width of straw possibilities, rendering them the successful rivals to our insular produce. In these Far Eastern lands many fancy digressions of plait making have been made, some of them of beautiful design and effect, but all of them embodying one or more of the methods already described as peculiar to hand plaitting, and generally speaking have been copies of patterns sent out from Europe.
The other branch of plait making that has now revolutionized the trade is that of machine made braids. Some few entirely straw plaits have been made by machine. A Luton inventor named Barrett designed a mechanical plaitter, which really did make fairly good whole straw plaits, but the invention came at a time when lightness was considered most essential, and the machine failed to do justice to either single or double split straws. Italy has for many years produced a straw plait woven with cotton or silk, of which there are many patterns, but which are all given the generic name of “Fiesole,” from the original place of manufacture. This Italian plait of fine Tuscan straws has been in use for many years, 1840 is supposed to have been the date, and the plait was made on looms imported from Switzerland. Both Italy and Switzerland have since produced innumerable patterns of plaits in which straw is combined with one or more suitable weaving media. But all these machine-made patterns, although legion in number, and extending over more than three-quarters of a century, cannot compare as a straw hat success with the machine woven braids of horsehair, cotton, silk, viscose, hemp and other similar fibres that have emanated from Switzerland, Italy, Germany and Japan.