Blackie, in "Lays of Highlands and Islands," referring to tin as money, says,—
"And is this all? And have I seen the whole
Cathedral, chapel, nunnery, and graves?
'Tis scantly worth the tin, upon my soul."
"Tin-penny."—A customary duty formerly paid to the tithingmen in England for liberty to dig in the tin-mines.
In 1846, Tin (Stannum, symbol Sn) was found in the United States only at Jackson, N. H. Since then it has been found, to a limited extent, in West Virginia and adjoining parts of Ohio, North Carolina, Utah, and North Dakota. The richest tin mines of the world, however, are in Cornwall, England, which have been worked from the time of the Phœnician discovery.
The tin which is found in Malacca and Banca, India, is of great purity, and is called "Straits Tin" or "Stream Tin." It occurs in alluvial deposits in the form of small rounded grains, which are washed, stamped, mixed with slag and scoriæ, and smelted with charcoal, then run into basins, where the upper portion, after being removed, is known as the best refined tin. Stream tin is not pure metallic tin, but is the result of the disintegration of granitic and other rocks which contain veins of tinstone. Banca tin is 99.961 parts tin, 0.019 iron, 0.014 lead in 100 parts; it is sold in blocks of 40 and 120 pounds, and a bar 0.5 meter long, 0.1 broad, 0.005 deep can be bent seventy-four times without being broken. Subjected to friction, tin emits a characteristic odor.
Tin in solution is largely used in electro-metallurgy for plating. Pure tin may be obtained by dissolving commercial tin in hydrochloric acid, by which it is converted into stannous chlorid; after filtering, this solution is evaporated to a small bulk, and treated with nitric acid, which converts it into stannic oxid, which in turn is thoroughly washed and dried, then heated to redness in a crucible with charcoal, producing a button of tin which is found at the bottom of the crucible.
Pure tin may be precipitated in quadratic crystals by a slight galvanic current excited by immersing a plate of tin in a strong solution of stannous chlorid; water is carefully poured in so as not to disturb the layer of tin solution; the pure metal will be deposited on the plate of tin, at the point of junction of the water and metallic solution.
In the study of tin as a material for filling teeth, we have deemed it expedient to consider some of its physical characteristics, in order that what follows may be more clearly understood.
Tin possesses a crystallized structure, and can be obtained in well-formed crystals of the tetragonal or quadratic system (form right square prism), and on account of this crystalline structure, a bar of tin when bent emits a creaking sound, termed the "cry of tin;" the purer the tin the more marked the cry.
The specific gravity is 7.29; electrical state positive; fusing point 442° F.; tensile strength per square inch in tons, 2 to 3. Tensile strength is the resistance of the fibers or particles of a body to separation, so that the amount stated is the weight or power required to tear asunder a bar of pure tin having a cross-section of one square inch.