Fig. 2.—House-Heating Boilers, Building No. 21.
Outside of the building, in a lean-to, there is a double-chamber rattler for the testing of paving brick according to the specifications of the National Brick Manufacturers’ Association.
In the smaller room adjoining the machine laboratory there are two small wet-grinding ball mills, of two and four jars, respectively, and also a 9-leaf laboratory filter press.
The remaining room on the first floor is devoted to the drying of clays and clay wares. The equipment consists of a large sheet-iron drying oven of special construction, which permits of close regulation of the temperature ([Fig. 7]). It is heated by gas burners, and is used for the preliminary heat treatment of raw clays, in connection with
the study of the drying problems of certain raw materials. It is intended to work with temperatures as high as 250° cent.
Another drying closet, heated by steam coils ([Fig. 8]), intended for drying various clay products, has been designed with special reference to the exact regulation of the temperature, humidity, and velocity of the air flowing through it. Both dryers connect by flues with an iron stack outside the building. This stack is provided with a suction fan, driven by a belt from an electric motor.
On the second floor are the chemical, physical, and research laboratories, dealing with the precise manipulations of the tests and investigations.